User manual AIWA XD-DV290 DOCUMENT

[. . . ] - Do not place the unit on a bed, rug, or similar surface that may block the ventilation openings. - Do not install the unit in a bookcase, cabinet, or airtight rack where ventilation may be impeded. 5 Foreign objects and liquid -- Be careful that foreign objects or liquid do not enter the unit through the ventilation openings. 6 Carts and stands -- The unit should be moved with care when placed or mounted on a stand or cart. [. . . ] In such a case, be sure to select "DIGITAL PCM" in the "AUD OUT". 14 ENGLISH E Connecting to a TV set and an AV receiver with the Dolby Pro Logic Surround system TV set to a video input jack (yellow) Video cord (supplied) yellow to VIDEO OUT 1 or 2 jack (yellow) AUDIO OUT VIDEO OUT S-VIDEO R L Rear of the unit COAXIAL OPTICAL DIGITAL AUDIO OUT to AUDIO OUT L (white)/ R (red) jacks white red to an AC outlet Audio cord (supplied) Receiver equipped with Dolby Pro Logic Surround to an audio input jacks (Left/ white, Right/ red) Front speaker (L) Front speaker (R) Center speaker Surround speaker (L) Surround speaker (R) En When your TV set is equipped with an S-video input terminal, see page 16. Set the setup menu correctly after connecting! According to the audio equipment and TV set to which this unit is connected, set the "TV TYPE" of the setup menu correctly referring to the following below . See "CHANGING SETUP VALUE" on page 32 in detail. TV TYPE When your TV set is a conventional-screen size TV: [4:3 LB ] When your TV set is a wide-screen size TV: [16:9 ] NOTE When the picture noise appears while copy-protected DVDs are played, connect the unit directly to a TV set. Do not connect through a VCR, TV/VCR or AV selector . CONTINUE ENGLISH 15 PREPARATIONS CONNECTIONS (CONTINUED) Connecting to a TV set equipped with S-video jack Rear of TV set S-video input connector (S1, S2) S-video cord (not supplied) to S-VIDEO OUT connector AUDIO OUT VIDEO OUT S-VIDEO R L Rear of the unit COAXIAL OPTICAL DIGITAL AUDIO OUT to an AC outlet Set the setup menu correctly after connecting!Set the "TV TYPE" of the setup menu correctly referring to the following below . See "CHANGING SETUP VALUE" on page 32 in detail. TV TYPE When your TV set is a conventional-screen size TV: ] [4:3 LB When your TV set is a wide-screen size TV: [16:9 ] NOTES · For the best possible picture clarity , it is recommended that an S (separate) video cord (not supplied) be used when connecting the unit to a TV set equipped with an Svideo input terminal. · When the picture noise appears while copy-protected DVDs are played, connect the unit directly to a TV set. Do not connect through a VCR, TV/VCR or AV selector . 16 ENGLISH REMOTE CONTROL Installing batteries Detach the battery cover on the rear of the remote control, and insert two R6 (size AA) batteries with 0 and 9 aligned correctly . ABOUT SYMBOLS PREPARATIONS Although this unit can play DVDs, super video CDs, V ideo CDs, Audio CDs or MP3 discs, some of the functions are restricted by the kinds of discs. In this operating instructions, the following symbols are used to make distinction. : Shows the function or the display for only DVDs. Shows the function or the display for only super video CDs. After turning off PBC, super video CDs or video CDs (version 2. 0) can be played back as well as audio CDs, without returning to the menu screen. 1 2 Press MENU once either while playing or when stopped. Within 2 seconds, press MENU again to turn off PBC. "PBC : [ON]" appears on TV screen. Moving the "aiwa DVD VIDEO" screen after 8 minutes To prevent TV screen from burning up, the "aiwa DVD VIDEO" screen moves around on TV screen, either when 8 minutes elapsed without any operations after the unit had stopped or when 8 minutes elapsed without any operations after playing an audio CD or MP3 disc. The "aiwa DVD VIDEO" screen does not move around only while displaying setup menu on TV screen, even if the unit stopped. The PBC ON/OFF menu changes to "PBC : [OFF]" , then it will disappear after 2 seconds. If PBC is turned off while stopping, the unit automatically starts playback. To turn on PBC Repeat the step 1 and 2 above. The unit automatically will start playback. When OPEN/CLOSE is pressed, the unit also automatically turns on PBC. To turn the power off Press POWER on the remote control. The unit enters the power standby mode, and the 6STANDBY/ON indicator turns red. If 15 minutes have elapsed without performing any operations This unit automatically returns to the power standby mode, when stopped without performing any operations for 15 minutes. The unit does not return to the power standby mode, only while displaying setup menu on TV screen. Digest menu The pictures divided into 9 are displayed. 1 Press TOP MENU either while playing or when stopped. En When the unit plays back: The current track playing is divided into 9 random intervals, then the pictures which were divided into 9 will be displayed on TV screen. When the unit stops: The each beginning of pictures up to the first 9 tracks on the disc will be displayed on TV screen. [. . . ] · Are the video connections firmly attached?· Is this unit connected directly to the television set?Or is it connected through a video deck, a selector switch, or a television with a built-in video deck?The picture may be bad when used with some television sets or projectors, due to the DVD copy protection scheme. [. . . ]