User manual AIWA XR-M33

[. . . ] 1 Power sources ­ Connect this unit only to power sources specified in the Operating Instructions, and as marked on the unit. 2 Polarization ­ As a safety feature, some units are equipped with polarized AC power plugs which can only be inserted one way into a power outlet. If it is difficult or impossible to insert the AC power plug into an outlet, turn the plug over and try again. If it still does not easily insert into the outlet, please call a qualified service technician to service or replace the outlet. [. . . ] Music calendar (only the first 20 tracks are displayed) Total number of tracks Total playing time · Pressing g repeatedly in stop mode shows the playing time of each track one after another. The power is turned on and the loaded disc begins to play. The selected track starts to play and continues to the end of that disc. nOTE · The unit may not play a CD-R/RW disc that is recorded on personal computers or some kinds of CD-R/RW recorders because of differences in recording platforms. Do not attach any seal or label to either side (the recordable side or the labeled side) of a CD-R/RW disc. Do not try to load another disc while a disc has already been loaded. Number of track being played Elapsed playing time The display automatically changes to the level indicator after 4 seconds. The level indicator shows an approximate playback sound level. Up to 30 tracks can be programmed from the loaded disc. All the tracks on the disc can be played randomly. Selected track number Program number To cancel random play, press RANDOM while pressing SHIFT so that "RANDOM" goes off. 4 flashes for 4 seconds and the tape runs without recording. After 4 seconds, the deck enters the recording pause mode. To insert a blank space of less than 4 seconds, press w REC/REC MUTE again while 4 is flashing. To insert a blank space of more than 4 seconds, after the deck enters recording pause mode, press w REC/REC MUTE again. Each time the button is pressed, a 4-second blank space is added. 1 Press TAPE on the remote control, or press FUNCTION on the main unit repeatedly until "TAPE" appears on the display. 2 Press z TAPE EJECT to open the cassette holder. 3 Load the tape to be recorded with the side to be recorded on first facing upward. Insert the tape fully into the cassette holder until it clicks, then push the cassette holder to close. When recording from the side facing downward, the tape stops at the end of recording of this side, even if the reverse mode is set to [ or ]. 5 Turn Dolby NR on or off using DOLBY NR on the main unit, SHIFT and DOLBY NR on the remote control, or JOG MODE and VOLUME/MULTI JOG on the main unit. [. . . ] The reception contains noise interferences or the sound is distorted. © Move the unit away from other electrical appliances. The sound is off-balance or not adequately high. After playing a CD, store the CD in its case. [. . . ]