User manual AKAI PDX2210

[. . . ] LOCATION OF CONTROLS PROGRAM LCD DISPLAY ANTI-SKIP (ESP) CD MODE CD SKIP DC IN 4. 5V ADAPTER JACK LINE OUT JACK PHONES JACK RECHARGE INDICATOR VOLUME CONTROL BASS BOOST HOLD RECHARGE SWITCH OP EN STOP BUTTON (power off) PLAY/PAUSE (power on) DOOR OPEN CONTROL OPERATION AND FUNCTION POWER SUPPLY Your CD player requires 2 size "AA" alkaline batteries (not include), or use the AC adapter OP EN BATTERY DOOR AC ADAPTER OPERATION Plug one end of the AC adapter into the DC 4. 5V jack, then plug the other end into AC wall outlet. PRECAUTIONS ON USING THE AC ADAPTER Don't touch the AC adapter with wet hands. Doing so is dangerous, as this could result in an electric shock. If the adapter plug is insert into the DC Jack of the Player, the power supply automatically switch to the AC/DC power and the batteries supply will be disconnected. DC OPERATION ALKALINE BATTERY INSTALLATION (NOT SUPPLIED) Insert two AA batteries (not supplied) into the battery compartment on the bottom of the unit. [. . . ] PROGRAMMED PLAY The tracks on the disc can be programmed for play in any order. (Up to 24 tracks can be programmed. ) During programming, "PROG" flashes in the display. NOTE: Programming is possible in the STOP mode. 1 2 3 Program number 3 5 9 Track number 1. Press the PROGRAM button in the STOP MODE. The "PGM" appears in the display. ) to select the first track to be programmed. Press the PROGRAM button again to enter the track into the memory. 3 4. Repeat steps 2 to 3 to program other track till you finish. After programming is finished, press the PLAY/PAUSE Button. Note: Programmed play will begins automatically if you program 24 tracks. "PGM" shows steady in the display and programmed play begins. The player stops automatically after all programmed tracks have been played. To play the same program again, press the PLAY/PAUSE Button. To check the program, press the STOP Button and then the PROGRAM button. THE CD MODE BUTTON This button can be pressed during play to accomplish many different kinds of play. CD Mode button pressed 3 times for INTR play. 5 times for return to normal play. SINGLE TRACK REPEAT 1" will appear in the Press the CD Mode button once during play, and the " display. The current track will be played over and over again until Stop button is pressed. ALL TRACKS REPEAT/CONTINUOUS PLAY ALL" will appear in the Press the CD Mode button twice during play. The all tracks on disc will be played over and over again until Stop button is pressed. INTRO PLAY Plays the first 10 seconds of all tracks once, then stops. This is useful if you do not remember the song titles. [. . . ] CLEANING THE CABINET Wipe with a soft cloth. If the cabinet is very dirty, dampen (not dripping wet) the cloth with a weak solution of soap water, and then wipe clean. 5 COMPACT HANDLING COMPACT DISCS 1. This unit is designed to play compact discs bearing the identificaDIGITAL AUDIO tion logo to the right. Discs that do not carry this logo may not conform to the CD standard and may not play properly. [. . . ]