User manual AKAI QX2100

[. . . ] AM : This unit is equip with a built-in directional ferrite antenna, so move and rotate the unit. To stop listen the radio, press the POWER ON/OFF (22). Push Switch(13), and the stereo 4 LISTEN TO THE CD 1. [. . . ] Do not charge, heat open, or short-circuit the batteries. Do not throw batteries into a fire. OTHER CD PLAYER FUNCTIONS CD SKIP/FAST SEARCH Button(18) : Press to skip forward to the next track or repeatedly to skip several tracks. Press Button return to the beginning of the track, or press repeatedly to skip backward several tracks. Press and hold the or button to search quickly within a track. REPEAT BUTTON(15) : A single Track or whole CD can be repeated as any time as you like. a) Press once to repeat your select track, the REPEAT LED (3) will blinks b) Press twice to play the disc continuously, the REPEAT LED (3) will light up. c) Press again to switch off this function. Press to play randomly all the track & REPEAT ALL, the MIX LED(6) and REPEAT LED will light up and the selected track number are displayed(1). CONNECT THE SPEAKER MIX BUTTON(12) : 1. Loose the Speaker Wire(35) and connect to the Speaker Terminal(31), BLACK/WHITE wire connect to RED terminal, BLACK wire connect to BLACK terminal. Locate two speakers to a far distance can get the good stereo effect. Black & White Black POWER SUPPLY This set operates at AC 240V - 50Hz 1. Insert the AC Power Cord(32) into a convenient standard outlet. Note: If the unit is switched off by pressing the STANDBY button on the remote control, it will be kept in the memory of standby. To turn on the unit: - by presing the STANDBY button on the remote control or - by pressing the POWER ON/OFF button (22) on the unit. Wait for about 5 seconds, press the same button again. The unit will be reset to tuner mode and the tuner LED indicator (25) will light on. PROGRAM BUTTON(16) : To select your own musical program. a) Insert the disc(29 & 30), the total number of the tracks is displayed(1). Button(16), the PROGRAM LED Indicator(23) and the track No. and CD TRACK NUMBER DISPLAY (1) " " will blinks. [. . . ] To prevent any accident due to this type of beam, the set should only be opened by properly trained personnel. The unit conforms to the international safety specifications IEC 65 (VDE 0860) and to guide lines of the european community, 82/499/EWG (VDE 0875), and also complies with current standards concerning electrical safety and electromagnetic compatibility EMC. WARNINGS ATTENTION: To reduce the risk of electric shock, do not remove the cover. There are no user serviceable parts inside the unit. [. . . ]