User manual ALAN MIDLAND BT2 INTERCOM

[. . . ] In base alla versione in vostro possesso nella confezione troverete: BT2 Intercom > 1 dispositivo di comunicazione BT2 > 1 Kit audio completo di due speakers stereo, microfono a braccetto rigido e microfono a filo > 1 Sistema di aggancio al casco con bi-adesivo > 1 Sistema di aggancio al casco con morsetto > 1 cavo audio stereo per collegare un iPod/ o un qualsiasi altro MP3 player > 1 Alimentatore da muro mini USB > Spugna anti vento, chiave a brugola e velcro per il montaggio BT2 Intercom TWIN > 2 dispositivi di comunicazione BT2 > 2 Kit audio completi di due speakers stereo, microfono a braccetto rigido e microfono a filo > 2 Sistemi di aggancio al casco con bi-adesivo > 2 Sistemi di aggancio al casco con morsetto > 2 cavi audio stereo per collegare un iPod o un qualsiasi altro MP3 player > 1 Alimentatore da muro mini USB con doppia postazione di ricarica > Spugna anti vento, chiave a brugola e velcro per il montaggio I dispositivi della confezione TWIN sono già abbinati tra loro per poter attivare immediatamente la funzione Intercom. > Connessione Bluetooth con il cellulare, con il GPS e connessione ad un MP3 player stereo oppure da un cellulare con funzione MP3 per ascoltare della musica > Connessione a filo per l'iPod/MP3 player stereo > Funzione Intercom Moto a Moto "I due piloti possono comunicare tra di loro fino a 200mt di distanza" > Connessione a ricetrasmettitori PMR446 via Bluetooth o a filo per comunicazioni Moto a Moto fino a 5Km di distanza MP3 player Bluetooth Attivare l'MP3 player/Play e Pausa Avanti di una canzone Indietro di una canzone Disattivare l'MP3 player Mantenere premuto il pulsante "Intercom" per 3 secondi Premere il pulsante "Telefono" Premere il pulsante "AUX" Premere il pulsante "Intercom" 6 Switching your Midland BT2 on and off . Thank you for purchasing the Midland BT2 Intercom, the first truly wireless multimedia system for bikers. The Midland BT2 is designed to be fitted directly on to your helmet and to be used for communications with Bluetooth devices like mobile phones, GPS Sat-Navs and MP3 players. [. . . ] Two Midland BT2 units can communicate up to a maximum range of approximately 200 meters outdoors. It is therefore possible to use BT2 as Intercom system for "BIKE-TO-BIKE" communications between two riders. The maximum range depends on the environment the units are being used in. (Be aware that some phones may not support voice answering) Manually: Tap the "Phone" button and start speaking. Attention: Remember that you can answer the call only after the third Ring. Rejecting a call If you don't wish to answer, you can let the mobile phone ring or press the "Telephone" button for a few seconds (you will hear one audio confirmation tone). Making a call There are several ways to make a call. From the mobile keypad: Dial the number on the mobile keypad: > Press "Send" on the mobile phone. > This way of calling should never be carried out whilst in charge of a moving vehicle. To redial the last number: > Press and hold "Telephone" button for 3 seconds in order to redial the last number (you will hear one audio confirmation tone). To make a voice call: > Briefly press "Telephone" button. If your mobile phone supports voice calls, you will be asked to spell the name of the contact you wish to call. The correct operation of this feature depends on the type of helmet used (Open or closed faced) and on the speed you are travelling at. We suggest you perform a few tests to determine the best settings for you as an individual. Attention: if you are listening the music using an MP3 Player connected via Bluetooth (A2DP protocol), you will not be able to use the "Dial last number" and "Voice call" commands, because these buttons are used to control the MP3 player. Therefore, if you want to make a call, you must first disable the music by pressing the "Intercom" button for 1 second (you will hear two audio confirmation tone) before making the call. Ending a call There are several ways to end a call: > Wait for the called person to end the call. > Press the Telephone" button for 3 seconds (you will hear an audio confirmation tone). Using the telephone feature To use the Telephone feature, be sure both units are turned on and correctly paired together, following the pairing procedure described in section "Pairing the unit with a mobile phone". Attention: information provided in this section refers to the establishment of a direct communication between the mobile phone and the BT2 unit. If the mobile phone is connected via the GPS Sat-Nav, the mobile phone features can only be managed via the GPS itself. Priority: Calls are always private and have a high priority, which means that all other communications are temporarily disabled when a call arrives and automatically re-enabled once the call ends. [. . . ] Attention: It is not possible to share music if the source is Bluetooth Stereo Player (A2DP) LED indication GENERAl None Single Blue flash every 3 seconds Triple red flash Single Blue flash every 3 seconds Single Red flash every 3 seconds Status Unit is switched off or full charged when connected to the power supply Unit being turned on Unit being turned off Standby Standby - low battery RED and BLUE (together) every 3 se- Active (Intercom, phone call or Bluetooth connection in progress) conds RED and BLUE (together) and one flash Active but low battery of RED light every 3 seconds Single red flash every 2 seconds Unit in charge when connected to the power supply SETUP Steady Red Rapid Red-Blue alternating flash Steady Blue for two second Blue light two time long flash Audio signals Ascending tone (low-high) Descending tone (high-low) Enable/Disable the Intercom 1 tone 2 tones Setup mode Pairing mode (searching for devices) Successful pairing/ Reset paired devices/Three way enabled Three way disabled Status Unit being turned on Unit being turned off 1 tone = enabled / 2 tones = disabled Specific feature turned on Specific feature turned off GENERAl Turn on the unit Turn off the unit Increase the volume Decrease the volume . Do this Press the Intercom button for 3 seconds at least (start Blue flash) Press the Intercom and AUX button together for 3 seconds (triple Red flash) Short or continues press on the Volume Up control Short or continues press on the Volume Down control Terminate a call Voice Dial (in stand by mode) Redial Last number (in stand by mode) Conversation among passenger, driver During a phone call, short pressure of the Intercom button on the unit which received and the phone the call Release the `extended' conversation above GPS Navigator The control is done only by the GPS INTERCOM Start using the Intercom Stop using the Intercom Start talking/short press the Intercom button Stop talking (after 60 sec. You will return to stand by mode)/Short press the Intercom button Short pressure of the Intercom button BlUETOOTH MP3 player Activate the MP3 player/Play and Pause Forword (next song) Backword (previous song) Deactivate the MP3 Player press and hold down the "Intercom" button for 3 seconds. While the music play, short press of the Phone button While the music play, short press of the AUX button Press the "Intercom" button OTHER BLUETOOTH DEVICES (dongle, 2way radio) Connect / Disconnect WIRED CONNECTION Activate /Deactivate SETUP/PAIRING Enter SETUP mode Pairing a Phone or a GPS Navigator Pairing a Bluetooth device Press the Intercom button for 7 seconds while the unit is off While in Setup mode, press the phone button until the LED light flash Red and Blue alternately While in Setup mode, press the AUX button until the LED light flash Red and Blue alternately Short press of the AUX button Long press of the AUX button MOBIlE PHONE Answer a call Reject a call Short press of the Phone button / say a word Long press the Phone Button / remain silent until the rings stop Pairing another BT2 unit While in Setup mode, press the Volume + on one unit (the light will flash Red and Blue alternately), press the Volume - on the other unit (the light will flash Red and Blue alternately). [. . . ]