User manual ALCATEL-LUCENT 9500 MICROWAVE CROSS-CONNECT DATASHEET

[. . . ] Alcatel-Lucent 9500 Microwave Cross-Connect The Alcatel-Lucent 9500 Microwave Cross-Connect (MXC) is a flexible, multiservice wireless transport platform for medium- to high-capacity mixed traffic. Offering a new generation of digital, point-to-point microwave radio capabilities, the 9500 MXC provides an effective way to meet the growing demand for high-capacity applications. 9500 MXC terminal with indoor unit (here using Intelligent Node Unit [INU] with up to 4 card slots) and Outdoor Unit (ODU) The compact Alcatel-Lucent 9500 MXC supports SDH/SONET and "super PDH" applications with higher flexibility afforded by its integrated crossconnection capabilities. [. . . ] Values for BER = 10 -3 are improved by 1 dB. [2] Transmit power output values for 64xE1 64 QAM will be reduced by 1 dB from the 64 QAM value indicated. [3] Receiver threshold values are for BER=10 -6. Values for BER = 10 -3 are improved by 1 dB. For complete list of Capacity/Channel/Modulation profiles, refer to 9500MXC User Manual Alcatel-Lucent 9500 Microwave Cross-Connect | Data Sheet 3 Table 1. RF, Tx and Rx specifications (Part 2) ODU300hp RF SPECIFICATIONS SYSTEM 15 GHZ 18 GHZ 23 GHZ 26 GHZ 28 GHZ 32 GHZ 38 GHZ Frequency Range, GHz T-R Spacings supported, MHz 14. 4 15. 35 315, 420, 490, 644, 728 245 MODULATION 17. 7 - 19. 7 1010, 1092. 5 380 21. 2 23. 632 1008, 1200, 1232 370 24. 52 26. 483 1008 27. 5 - 29. 5 1008 31. 8 - 33. 4 812 37. 0 - 9. 46 1260 Maximum Tuning Range (dependent upon T-R spacing), MHz TRANSMITTER SPECIFICATIONS 360 360 370 340 Power Output, nominal (dBm) QPSK 16 QAM 32 QAM 128 QAM 256 QAM 22 20 19. 5 18 16 19. 5 17. 5 17 16. 5 15. 5 13. 5 19. 5 17. 5 17 16. 5 15. 5 13. 5 15. 5 13. 5 13 12. 5 11. 5 9. 5 15 13 12. 5 12 11 9 18 16 15. 5 15 14 12 17. 5 15. 5 15 14. 5 13. 5 11. 5 64 QAM [2] 19 RECEIVER SPECIFICATIONS [1] [3] CAPACITY CHANNEL MODULATION Threshold at 10 -6 BER (dBm) for RACs : RAC30 RAC30 RAC30 RAC30 RAC30 RAC30 RAC30 RAC30 RAC30 RAC 3X/40 RAC3X RAC3X RAC30 RAC 40 RAC 3X RAC3X RAC3X RAC3X 5xE1 10xE1 20xE1 10xE1 20xE1 32xE1 40xE1 52xE1 64xE1 64xE1 7 MHz 13. 75 / 14 MHz 7 MHz 13. 75 / 14 MHz 13. 75 / 14 MHz 27. 5 / 28 MHz 27. 5 / 28 MHz 27. 5 / 28 MHz QPSK QPSK -91. 5 -88. 5 -85. 5 -85 -82 -75 -79 -75. 5 -72 -73. 5 -76 -69 -70. 5 -70. 5 -65 -91 -88. 5 -85. 5 -84. 5 -81. 5 -75 -78. 5 -75 -72 -73 -76 -69 -70 -70 -64. 5 -71. 5 -65. 5 -65. 5 -91 -88 -85 -84. 5 -81. 5 -74. 5 -78. 5 -75 -71. 5 -73 -75. 5 -68. 5 -70 -70 -64. 5 -71 -65 -90 -87 -84 -83. 5 -80. 5 -73. 5 -77. 5 -74 -70. 5 -72 -74. 5 -67. 5 -69 -69 -62. 5 -69. 5 -64 -89 -86. 5 -83. 5 -82. 5 -79. 5 -72. 5 -76. 5 -73 -69. 5 -70. 5 -73. 5 -66 -67 -67 -61. 5 -69 -62. 5 -89 -86 -83 -82 -79 -72 -76 -72. 5 -69 -70. 5 -73 -65. 5 -67 -67 -61. 5 -68. 5 -62 -88. 5 -86 -83 -82 -79 -72 -76 -72. 5 -69 -70 -73 -65. 5 -66. 5 -66. 5 -60. 5 -68. 5 -62 27. 5 / 28 MHz QPSK 16 QAM 16 QAM 64 QAM 16 QAM 32 QAM 64 QAM 27. 5 / 28 MHz 64 QAM 16 QAM 64 QAM 128 QAM 128 QAM 128 QAM 256 QAM 64 QAM 128 QAM 75xE1, xSTM1 55 / 56 MHz 75xE1, xSTM1 40 MHz 75xE1, xSTM1 27. 5 / 28 MHz 75xE1, xSTM1 27. 5 / 28 MHz 1xSTM1 93xE1 106xE1 2xSTM1 27. 5 / 28 MHz 27. 5 / 28 MHz 55 / 56 MHz 55 / 56 MHz All specifications are referenced to the ODU antenna flange, and are typical values unless otherwise stated, and are subject to change without notice. For guaranteed values (over time and operational range) subtract 2 dB from power output, add 2 dB to threshold values, and subtract 4 dB from system gain values. [1] System gain and receiver threshold values are for BER = 10 -6. Values for BER = 10 -3 are improved by 1 dB. [2] Transmit power output values for 64xE1 64 QAM will be reduced by 1 dB from the 64 QAM value indicated. [3] Receiver threshold values are for BER=10 -6. Values for BER = 10 -3 are improved by 1 dB. [. . . ] All other trademarks are the property of their respective owners. The information presented is subject to change without notice. [. . . ]