User manual ALCATEL-LUCENT OMNIACCESS SAFEGUARD CONTROLLER

[. . . ] Thank you for your purchase of Alcatel-Lucent Products and Services. Quick Start Guide | OmniAccess SafeGuard Family P/N: 005-0023 Alcatel-Lucent Customer Support Information Main Site http://www. alcatel-lucent. com/wps/portal/enterprise Support Site http://www1. alcatel-lucent. com/enterprise/en/support/index. html Email support@ind. alcatel. com Sales & Support Contact Center Telephone North America 1-800-995-2696 Latin America 1-877-919-9526 Europe +33 (0) 38 85 56 92 9 Asia Pacific +65 6586 1555 Worldwide 1-818-878-4507 *005-0023* Rev. A1 *A1* Firewall IDS/IPS Core Switch Internet 2. [. . . ] Please note: rack mount screws are not included. Set the correct time zone, one per line. The example below displays a sample session. (SafeGuardOS) (Config)#clock timezone PST -8 (SafeGuardOS) (Config)#exit 10. SFP Installation To set the on-board real-time clock, first enter the `clock' command to set the time and date. The example below displays a sample session. (SafeGuardOS) #clock set 10:05:00 Nov 1 2005 (SafeGuardOS) #configure terminal (SafeGuardOS) (Config)#sntp client mode unicast (SafeGuardOS) (Config)#sntp server <sntp-server-ipaddr> Back Management Flash Power 11. Set Up Simple Network Management Protocol (SNMP) 0000FCS000 Enter the OmniAccess SafeGuard system name. The example below displays a sample session. (SafeGuardOS) (Config)#snmp-server sysinfo name <name> Ethernet Port COM PORT SETTING Serial Number Emulation Type (PC or Laptop) vt100 Bits Per Second 9600 Data Bits 8 Parity Bits None Stop Bits 1 Flow Control None The terminal or PC displays the login prompt. SFPs are Inserted into OmniAccess SafeGuard Family box This command sets the physical location of the OmniAccess SafeGuard. The range for name, location and contact is 1 to 31 alphanumeric characters. The OmniAccess SafeGuard management application uses a format of "region_building" for device location addressing. The example below displays a sample session. (SafeGuardOS) (Config)#snmp-server sysinfo location <location> 4. Power Options The SNMP read-only community string allows access to the OmniAccess SafeGuard statistics. [. . . ] Set Up an Admin User Password Enter the OmniAccess SafeGuard password. (SafeGuardOS) (Config)#aaa mgmt-user passwd admin <password> We supply country-specific power cords. (SafeGuardOS) (Config)#exit 13. Save Configuration (SafeGuardOS) #write memory Are you sure you want to save? [. . . ]