User manual ALCATEL-LUCENT OMNIPCX 4400-SECTION 4 SBC ALCATEL 4059

[. . . ] ALC TEL Alcatel OmniPCX 4400 SECTION 4 SBC Alcatel 4059 Ed. 03 ALC TEL Alcatel OmniPCX 4400 Section 4 - SBC Alcatel 4059 Section 4 - SBC Alcatel 4059 SUMMARY SBC Alcatel 4059 General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference to the other modules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation - Hardware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] As of R4. 2, the Manager can configure a threshold which indicates the maximum number of attendants allowed before incoming call display changes from "list" mode to "counter" mode. Remark: The two modes ("list" and "counter" are presented to the module Alcatel 4059 attendant console - Basic screens - § Supervision icons. 2. Parametering the attendant for the 4059 MAC application Object name: Attendant > Attendant sets Attributes: Attendant Id: Attendant Group Id: Shelf Address Board Address Equipment Address Set Type : Enter the attendant reference number. : Enter the number of the attendant group to which this set is attached (-1 no attendant group). : According to the sire: : According to the sire: : According to the site: : Select: - 4059 MAC - MAC 2 equipts Warning: - the MAC 2 equipts option must be selected if the Alcatel 4059 terminal uses the TA-MMK unit (as from R4. 1). - both options are possible if the Alcatel 4059 terminal uses the TA-MAC unit (releases prior to R4. 1). : Enter the entity number attributed to the attendant. : Select "MAC/PC". Entity Number V24 extension, MAC/PC": Ed. 03 Ref. 3BA19919ENAA 4. 17 ALC TEL Alcatel OmniPCX 4400 SBC Alcatel 4059 Management Section 4 - SBC Alcatel 4059 Warning: as the TA unit receives its power supply from the UA links, 4 pieces of equipment must be placed in order. These equipments are allocated automatically to the 4059 MAC, regardless of whether or not used. Remark: the TA-MMK unit only uses one UA link for it's power supply but it is recommended to select MAC 2equipts. The attendant console must be declared: - on devices 0, 2, 4, etc. . . of the UA board if the configuration is MAC 2equipts. - on devices 0, 4, 8, 12, 16, 20, 24 or 28 of the UA board if the configuration is 4059 MAC. 3. Configuring display of incoming calls to the 4059 MAC application Display configuration of calls in the application ("list" or "counter" mode) is via an attendant threshold that can be managed for each group of attendants. Object name: Attendant > Attendant groups Attributes: Physical directory number Threshold greater than lists on 4059 : : Displays the directory number of the selected attendant group. Enter threshold value, must be between 1 and 20 (6 by default). 4. 18 Ref. 3BA19919ENAA Ed. 03 ALC TEL Alcatel OmniPCX 4400 Section 4 - SBC Alcatel 4059 SBC Alcatel 4059 Customized management 44A01609000A161AAEN SBC Alcatel 4059 Customized management Edition: 03 1. General Information The 4059 application allows access to different types of external directories that can be used for the "Call by name" telephone feature. These directories are LDAP and ODBC type directories. To use these directories, the site manager must first configure access to them from the 4059 application. This access differs depending on whether the directory is ODBC or LDAP type. To carry out this operation, the site manager is supposed to have the required knowledge of: - the WindowsTM environment, - ODBC and LDAP operating principles, - the "Call by name" telephone feature. For more information, refer to module Alcatel 4059 attendant console - Telephone features - § Call by name. Reminders: LDAP (Lightweight Directory Access Protocol) is a client-server protocol that offers access to directory services via the network and/or the Internet. ODBC (Open Database Connectivity) is a format defined by Microsoft allowing a user to access a database running in Windows. This database can be a telephone directory for a 4059 application. [. . . ] If the modification is on the basic data (new source file): Follow the principle of the "add" procedure until the "Select the data source" window is displayed. When this opens, select the database to be modified, then continue as for the "add" procedure. Delete Add/Delete an LDAP directory. . . tab (see § 2 : Accessing the directory configuration menus). [. . . ]