User manual ALCATEL-LUCENT OMNIVISTA SAFEGUARD MANAGER

[. . . ] OmniVista SafeGuard Manager Release 3. 0 Administration Guide PART NUMBER: 005-0034 REV A1 PUBLISHED: MARCH 2007 ALCATEL-LUCENT 26801 WEST AGOURA ROAD CALABASAS, CA 91301 USA (818) 880-3500 WWW. ALCATEL-LUCENT. COM Alcatel-Lucent Proprietary Copyright © 2007 Alcatel-Lucent. This document may not be reproduced in whole or in part without the expressed written permission Alcatel-Lucent. Alcatel-Lucent ® and the AlcatelLucent logo are registered trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners. 2 OmniVista SafeGuard Manager Administration Guide Contents Preface About This Guide. [. . . ] Select a filter element and click Edit to change the values of an existing filter element. Select a filter element and click Delete to remove a filter element. 8 9 10 Select a filter element and click Copy to clone the filter elements. 106 OmniVista SafeGuard Manager Administration Guide Chapter 5: Device Configuration Network Zones Network resources can be organized into network zones. These zones or logical groups are collections of nodes and network segments. A zone is an easy way to define the resources for a group and naming that entity. For example, you can define a network zone for the servers for the Finance organization or for the resources that you want to allocate to unauthenticated users. Zone filtering has two major benefits for the device administrator. It simplifies administration by eliminating the entry of separate numbers for each device or network segment. If a new resource is added within an existing network zone, it is available to any user that already has access to that zone. To define a network zone: 1 Select Network Zones from the navigation tree (Figure 61) and click New in the Action Bar. The New NetworkZone dialog box displays (Figure 66). Figure 66 New NetworkZone 2 3 Specify a name for the network zone in the Name field. Click New to add a new element for the network zone. The New NetworkZoneElement dialog box displays (Figure 67). New Network Zone Element Figure 67 OmniVista SafeGuard Manager Administration Guide 107 Chapter 5: Device Configuration 4 Specify the network zone attributes as follows: Table 22 Network Zone Elements Attributes Attribute Type IP Address Description Select a network type from the Type dropdown list, Host IP, Network, IP Range, Host MAC, MAC Mask. Depending on what you selected in the Type field, enter the IP or the MAC address. 5 6 Click OK. The network zone element displays in the Elements field of the New NetworkZone dialog box (Figure 66). Click OK on the New NetworkZone dialog box to create a new network zone. The network zone is added and displayed under the Network Zones object in the navigation tree. You can add more than one network zones using the same process. Select a network zone element and click Edit to change the values of an existing network zone element. Select a network zone element and click Delete to remove a zone element. Select a network zone element and click Edit to change the values of an existing network zone element. [. . . ] These statistics are helpful in analyzing server performance. Administrators can use this drill-down capability to view server CPU and memory performance, OmniVista SafeGuard Manager client connections, Layer 7 events, and any application or flows processed. The following parameters are collected as part of server health: Memory CPU Disk Number of OmniVista SafeGuard Manager users Number of flows processed Number of Layer 7 events processed Server statistics are collected periodically and stored in the database on a daily basis. The default rate at which the statistics are collected is 1 minute and is controlled by the ServerHealth_Interval_In_Minutes parameter in application. conf. [. . . ]