User manual ALCATEL-LUCENT SPEDDTOUCH DSL ROUTERS 1

[. . . ] AlcatelTM DSL Router Family Command Line Interface Guide P/N 3EC 16963 AAAA-TCZZA October 1999 Copyright Alcatel provides this publication "as is" without warranty of any kind, either expressed or implied, including, but not limited to, the implied warranties of merchantability or fitness for a particular purpose. No part of this book may be reproduced in any form or by any means without written permission from Alcatel . Changes are periodically made to the information in this book. They will be incorporated in subsequent editions. [. . . ] This number must be 0 or 1, or it may be omitted. eth ip options avdfr off txrip txrip1 txrip2 txdef/avdfr port# Example: ETH IP RIPMULTICAST Lets you change the multicast address for RIP-1 compatible and RIP-2 packets. eth ip ripmulticast <ipaddr> [<port#>] ipaddr port# Example: IP address of the remote network or station, in the format of 4 decimals separated by periods. This number must be 0 or 1, or it may be omitted. eth ip ripmulticast 128. 1. 210. 64 ETH IPX ADDR Sets the IPX network number for the Ethernet LAN connection. eth ipx addr <ipxnet> [port#] ipxnet port# Example: IPX network number represented by 8 hexadecimal characters. This number must be 0 or 1, or it may be omitted. eth ipx addr 123 140 Chapter 5. Command Line Interface Reference ETH IPX DISABLE Disables IPX routing across the Ethernet LAN. This acts as a master switch allowing you to disable IPX Routing for testing or control purposes. eth ipx disable [port#] port# Example: Port number of the Ethernet LAN. This number must be 0 or 1, or it may be omitted. eth ipx disable ETH IPX ENABLE Enables IPX routing across the Ethernet LAN. This acts as a master switch that allows you to enable IPX routing. eth ipx enable [port#] port# Example: Port number of the Ethernet LAN. This number must be 0 or 1, or it may be omitted. eth ipx enable ETH IPX FRAME Sets the frame encapsulation method. eth ipx frame <type> type 802. 2 (DEC standard) 802. 3 (Intel standard) dix (Xerox/Ethernet II standard) eth ipx frame 802. 3 Example: Chapter 5. Command Line Interface Reference 141 ETH LIST Lists the Ethernet LAN port number, status of bridging and routing, IP protocol controls, and IP address and subnet mask. eth list Example: eth list Response: ETHERNET INFORMATION FOR <ETHERNET/0> Hardware MAC address . . . . . . . . . . . . . . Advertise me as default router Process IP RIP packets received . 00:20:6F:02:98:04 no no yes rip-1 compatible yes rip-1 compatible yes default 192. 168. 254. 254/255. 255. 255. 0 none no 00000000 802. 2 142 Chapter 5. Command Line Interface Reference Remote Router Access Configuration (REMOTE) The following commands allow you to add, delete, and modify remote routers to which the target router can connect. Remote router information that can be configured includes: · · · · · · · · · · PVC numbers Security authentication protocols and passwords WAN IP/ IPX addresses IP routes IPX routes and SAPS Remote bridging addresses and bridging control Host mapping Encryption (option) IP filtering (option) L2TP tunneling (option) REMOTE ? Lists the supported keywords. help del delete enable disable enaAuthen disAuthen setOutPasswd delOurPasswd delOurSysName listPhones setL2TPClient setPhone setBod addCaller setTimer setSpeed setPPPCallBack delPPPCallBack delHostMapping addServer setIPTranslate setPslavePPP blockNetBIOS setCompression statsclear setRmtlpAddr dellproute bindlPVirtualRoute setlpOptions listlProutes addlpxroute dellpxroute addlpxsap dellpxsap listBridge setBrOptions delBridge enaBridge add list setAuthen setPasswd setOurSysName setLNS delPhone delCaller setDialBack addHostMapping delServer ipfilter stats addlproute unbindlPVirtualRoute setlPxaddr listlpxroutes listlpxsaps addBridge disBridge Chapter 5. Command Line Interface Reference 143 REMOTE ADD Adds a remote router entry into the remote router database. remote add <remoteName> remoteName Example: Name of the remote router (character string). [. . . ] none Commands used to set and modify your IPX settings: 1 2 eth ipx enable eth ipx addr <ipxnet> [port#] Ex: eth ipx addr 123 3 4 eth ipx frame [802. 2 | 802. 3 | DIX] Ex: eth ipx frame 802. 2 remote add <remoteName> Ex: remote add ipx_server 5 remote setipxaddr <ipxnet> <remoteName> [port#] Ex: remote setipxaddr 456 ipx_server 7 rem ote ad d ip xrou te < ipxnet> < ticks> < rem oteN am e> Ex: remote addipxroute 2002 1 4 ipx_server 6 rem ote addipxsap < servernam e> < Internal IP X net #> <IPX node address> <socket> <server type> <hops> <remoteName> Ex: remote addipxsap SERVER2 2002 0:00:00:00:00:01 451 4 2 ipx_server > ipxsaps Service Name Type Node number Network Skt Hops SERVER2 4 000000000001:00002002:0451 1 Appendix B. Configuring IPX Routing 255 256 Appendix B. Access the Command Line Interface Th This section provides step-by-step instructions on how to connect the PC to the Console Port of the router. It then describes how to access the Command Line Interface from different environments. Connect the PC to the Console Port of the Router For local access, the PC (or ASCII) terminal is connected to the Console port of the router. [. . . ]