User manual ALCATEL PHONE ALERT FIRE

[. . . ] Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. HANDSET LAYOUT volume switch dial button display options button TO SET THE FLASH TIME You can set the FLASH time from: 100ms / 300ms / 600ms . To enter the options menu, press the options button, SET 1 DATE appears. Press the ▲(+) or ▼(-) arrow button until SET 4 FLASH appears. [. . . ] After dialing the telephone number, press and release the *TONE button on the telephone. This allows access to phone services that require a tone, such as banking and long-distance services. After you hang up the handset, the telephone automatically returns to pulse service. CALLER ID DISPLAY MESSAGES The following special messages indicate the status of a message or the unit: Battery power level is low. Please replace the batteries as soon as possible in order to maintain Caller ID operation. REDIALING A NUMBER If you want to call the last number you dialed again (up to 32 digits), use the redial feature. The last number called is automatically redialed. TROUBLESHOOTING TIPS NO DIAL TONE • Check all cabling to make sure that all connections are secure and not damaged. €¢ Check the hook switch: Does it fully extend when handset is lifted from cradle?CALLER ID (CID) FEATURES Visual message waiting indicator Current date Current time New calls Battery compartment MEMORY Before you store a telephone number in memory, make sure the dialing mode is correctly set for the type of service you have. The default dialing mode is tone (touch-tone), so if you have pulse (rotary) service, you must first change the dialing mode. Repeat step 3 and 4 to set the day, hour and minute. Press options button again to store the value. The date and time will be updated, every time a FSK Caller ID message has been received If a DTMF Caller ID has been received, then it will get the date and time from the system clock of the phone. NOTE: The phone return idle mode if no key has been pressed for 20 seconds or press DELETE before the completion of the current operation, the phone will time out and return to the idle mode without changing the current time. Use the handset number keys to enter the telephone number (up to 16 digits). Push the desired memory location button and press the store button. NOTE: If you make a mistake, use the delete button to delete wrong digits. INTRODUCTION Your Caller ID phone stores and displays specific information, provided by your local telephone company, to subscribers of Caller ID or similar caller identification services. Your Caller ID phone enables you to: Identify callers before you answer the phone. €¢ View the time and date of each incoming call. • Record up to 60 Caller ID messages sequentially. [. . . ] SETTING THE LOCAL AREA CODE The Caller ID unit uses the programmed area code to determine the number format to display when a valid Caller ID signal is received. To enter the options menu, press the options button. Press the ▲(+) or ▼(-) arrow button until SET 2 CODE appears. Press the options button to show the current local area code. [. . . ]