User manual ALESIS CDTWIN

[. . . ] INTRODUCTION The CD Twin is a stylish, new concept for CD backup. With it's lightweight design, the CD Twin provides not only CD backup, but also doubles as an audio CD track editing console for making a personal CD. It can be used as a stand-alone CD player and can also be used as an external CD-RW when connected to a PC via USB. The stylish design makes the elegant CD Twin no longer a boring copy tower. [. . . ] Insert the next audio CD, repeating steps 1 through 4, if you would like to add additional tracks to your compilation. CD Twin 2. Copy Track NOTE: After you have finished all of the track editing, you must use the [3. Close Disc] function to make your new CD playable on any standard CD player. From the main menu, press the << or >> buttons until [3. Close Disc] is displayed on the LCD and press the START button. Make sure that your newly burned disc is still in the Writer CD-RW drive. CD Twin 3. The LCD will show the total number of tracks and the available free space remaining on the CD-RW disc. Press the START button to begin the closing process. Pressing the CANCEL button will abort the close disc function. Track 07 26:15 Free 48:29 Go? III. The LCD will display the following message during the disc closing process. Closing Disc. . . Once the closing disc process has finished, the LCD will return to the main menu and you may then continue with any other function of the CD Twin. ATTENTION!!After executing the [Close Disc] function, you CAN NOT add any more tracks to the disc or change the CD in any way!!! 9 3. 4 MUSIC PLAYER This feature allows you to play standard CDs with your CD Twin. Simply plug in speakers to the earphone output and select a play mode. You can play an entire CD or pick only songs you would like to hear. Insert an audio CD into either drive, select [Music Player] from the main menu and press START. CD Twin 4. Then select correct the drive to play the CD. Use the << or >> buttons to select the drive and press START. Select Target: <Reader III. Then select the song tracks that you would like to play by moving the cursor under the track numbers and pressing START. ALL 1 2 3 4 5 6 IV. You can choose individual tracks or play the entire CD by selecting [ALL]. Track selection is made by moving the curser under the track number with the << or >> buttons and pressing START. gh bi ALL 1 2 3 4 5 6 V. When you are finished selecting the tracks, press the >> button until the cursor is under the [OK] option, and press START to enter [PlayMode]. Select [Once] or [Repeat], depending on how you would like your music served up, and press START to play the CD. [. . . ] You should then be able to access the CD Twin as a logical drive letter from your PC. To resume stand-alone operation, simply un-plug the USB cable. 14 5. SPECIFICATIONS Supported Disc Formats Blank Disc Type All audio CDs, Data CD, VCD, CD-1, Photo-CD CD-R, CD-RW CD Twin Burning Speed (CD-R/CD-RW) Copy Disc Copy Track Rawcopy Disc PC via USB2. 0 Copy Function Connection Audio Output Power Supply Front Control Panel Weight Dimensions 24x (fixed) 16x (fixed) 4x (fixed) 32x (max) CD to CD, Personal audio CD editing USB 2. 0 ­ connect to PC as external CD-RW. Earphone jack (44. 1Khz, 16bit Stereo) 100V~240V, 50/60Hz, AC input 2x16 LCD display, 4 control keys (START, CANCEL, <<, >>) 3. 88 lbs, 1760 g 11. 26 x 8. 90 x 2. 44 286mm x 226mm x 62mm 15 6. [. . . ]