Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ALESIS LATIN QCARD. We hope that this ALESIS LATIN QCARD user guide will be useful to you.
Lastmanuals help download the user guide ALESIS LATIN QCARD.
Detailed instructions for use are in the User's Guide.
[. . . ] MIC/LINE For the first channel, switch between a MICROPHONE input or the LINE inputs on the rear of the unit. EFFECTS RETURN Adjust the amount of signal sent back to the mixer from an external effects processor. 8 STEREO OR 16 MONO LINE INPUTS Plug stereo sources into both the top (LEFT) and bottom (RIGHT) jacks. [. . . ] for mono sources , use only the top (LEFT) jack. Doing this will "normal" the signal to both LEFT and RIGHT inputs. The MultiMix8Line provides a wide gain range suitable for simultaneous use of both -10dbV (consumerlevel) and +4dBu (professional-level) equipment. OPTIONAL MICROPHONE INPUT ON CHANNEL 1 Select MIC or LINE for channel 1 using the switch on the front panel. Note that a microphone must be connected to the XLR (3-pin) input and is always treated as a mono signal. Ensure that your microphone does not require phantom power for operation. Once you have connected your sources, adjust their volume, pan position, and aux send levels. (See below for more on Aux Send and Return. Connect your external effects processor to the EFFECTS SEND and EFFECTS RETURN jacks of the second mixer. The AUX SEND levels from both mixers will now be routed to the effects processor. Control the overall effect level using the EFFECTS RETURN knob on the front of the second mixer. STEREO EFFECTS SEND and RETURN Connect a reverberation unit (such as the Alesis MidiVerb4) or other effects processor to these jacks in order to add effects to your mix. If you are using a mono effects processor, connect only the LEFT (MONO) jacks of the MultiMix8Line. Using the LEFT (MONO) jack only, the effects return will be heard through both LEFT and RIGHT output channels. Once your effects processor is connected, use the AUX SEND knob on each channel to adjust the amount of effect applied to that channel. Consider setting your effects processor to "100% wet" so that it sends only effected signal back to the MultiMix8Line. [. . . ] Consider setting your effects processor to "100% wet" so that it sends only effected signal back to the MultiMix8Line. This will make it easier to dial in just the right effect amount using the channels' AUX SEND knobs and the master EFFECTS RETURN knob. These are balanced jacks, so use TRS cables for best results. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ALESIS LATIN QCARD
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ALESIS LATIN QCARD will begin.
