User manual ALFATEC CT2740R

[. . . ] Do not use the vacuum cleaner without a dust bag. Replace the dust bag before it is full in order to maintain the best efficiency. Do not use the vacuum cleaner to pick up matches, live ashes or cigarette butts. [. . . ] Keep the vacuum cleaner away from stoves and other heat sources. Heat can deform and discolour the plastic parts of the unit. Avoid picking up hard, sharp objects with the vacuum cleaner as they may damage the cleaner parts. Do not block the suction or the exhaustion part. Switch the vacuum cleaner off at the machine before unplugging from the electrical outlet. Do not pull on the cord to disconnect the plug from the electrical outlet. Ensure that it is disconnected before attending to the filter. The larger particle of dust filtered from Cyclonic Filter remain in Dust Barrel when suctioned air and dust revolves in the Cyclonic Filter. So the dust bag contains only smaller ones. When the Dust Barrel is filled with dust up to the indicating line, it needs disposing and cleaning. 1. Turn the Dust Barrel to the left and pull it. 2. Disconnect the Cyclonic Filter from extension wand and handle. 3. Remove thread and hair tangled around the net. 4. After cleaning the Dust Barrel and Cyclonic Filter, connect the Cyclonic Filter with extension wand and handle(washed part should be dried in the shade throughly before assembling). [. . . ] 4. After cleaning the Dust Barrel and Cyclonic Filter, connect the Cyclonic Filter with extension wand and handle(washed part should be dried in the shade throughly before assembling). 5. Push and turn the Dust Barrel to the right. Adjust indicating marks each other carved on Dust Barrel and Cyclonic Filter. CYCLONIC FILTER DUST BARREL CREVICE TOOL 5 CLEANING THE INLET FILTER(OPTION) 1 2 3 4 NOTE : Do not allow the filter to become clogged as this may cause power reduction or may damage the motor. 7 - IF YOU HAVE A PROBLEM PROBLEM Motor does not start. [. . . ]