Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ALPATEC AC 105.1 ETP. We hope that this ALPATEC AC 105.1 ETP user guide will be useful to you.
Lastmanuals help download the user guide ALPATEC AC 105.1 ETP.
Detailed instructions for use are in the User's Guide.
[. . . ] ⷠDo not use outdoor, in a wet environment, close to a bath-tub, a shower or a swimming pool. ⷠDo not immerse appliance or power cord · This product is provided with its own power cord. Do not use any other electrical connection but the one supplied and recommended by the manufacturer. [. . . ] Automatique mode: if the ambient temperature is lower than 23°C, the appliance will work in heating mode and if the ambient temperature is higher than 23°C it will work in cooling mode. Cooling mode: if the ambient temperature is lower than the required temperature, the appliance will fan only and if the ambient temperature is higher than the required temperature, it will work in cooling mode. Heating mode: if the ambient temperature is higher than the required temperature, the appliance will fan only and if the ambient temperature is lower than the required temperature, it will heat. Sleep mode: use this mode when the appliance is cooling or heating. In cooling mode, set temperature will increase 1°C every hour for two hours, in heating mode it will decrease 1°C every hour for two hours. Press on the key (11) or (12) of the control panel or the key (d) on the remote control to set the desired temperature from 16° to 30°C (1 pressure = 1°C). Otherwise the screen displays the room temperature. ⷠThe temperature of the unit is selected first to 24 °C for the cooling mode. Press the fan speed key (13-c) to choose the desired fan speed : low or high. The low fan indicator or high fan indicator (4) will light up. ⷠOn automatic mode function, the unit will automatically choose the fan speed according to the room temperature (the speed indicators will light up). To prolong the life of the compressor, after switching off the unit, wait for 3 minutes minimum before plugging it again. The unit has a three minute compressor delay protection circuit. ⷠYour unit must always be used in an upright position because it contains a cooling agent. During the cooling process, water is extracted from the air into the unit. When the water tray of the unit is full, the compressor stops, the fan only continues to run. [. . . ] Don't add air exhaust yourself and remove it. Wait until the temperature of the unit cools. Stop and unplug the unit and stop running immediately in case of something below happens. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ALPATEC AC 105.1 ETP
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ALPATEC AC 105.1 ETP will begin.
