Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ALPATEC AC 9 FITP. We hope that this ALPATEC AC 9 FITP user guide will be useful to you.
Lastmanuals help download the user guide ALPATEC AC 9 FITP.
Detailed instructions for use are in the User's Guide.
[. . . ] ⷠDo not use outdoor, in a wet environment, close to a bath-tub, a shower or a swimming pool. ⷠDo not immerse appliance or power cord · This product is provided with its own power cord. Do not use any other electrical connection but the one supplied and recommended by the manufacturer. This could be dangerous and may damage the appliance. [. . . ] - At the end of your product's life, remove the batteries before you hand it for recycling. Your product can be ran either with the control panel or with the remote control In the following, only the control panel will be taken into account. For the remote control please use the following correspondence: On the LCD screen of remote control, indicators of each parameter will light on when needed. STARTING: Plug in the unit, a sound is heard Press button M/A (P), the unit starts setting the last used parameters (mode, temperature and fan speed). Each time, function changes according to following diagram: AUTOMATIC -> HEAT -> FAN ONLY -> COOLING -> DRY A few seconds after, room temperature will be displayed again. temperature range is from 16°C to 31°C. ADJUSTMENT OF THE FAN SPEED : Each pressure, fan speed changes according to following diagram: LOW -> MEDIUM -> HIGH During the dry operation, the fan speed cannot be adjusted. There is an automatic regulation with a safety sensor. When the sensor temperature is lower than 30°C, high speed is selected. When it is higher than 45°C, low speed is selected. If it is between the two values, the speed can be selected manually. Your unit will choose the mode to be run according to the room temperature: If T 20°C, heating mode. A sound can be heard and the unit stops running. TIMER: To turn on the unit automatically, press TEMPS (M) when the unit is plugged but not running. Set remaining time before starting using + / - (J). Each pressure adds or removes half an hour, from 0. Remaining time before starting is displayed on VFD screen and adjusted every half hour. To turn off the unit automatically, press TEMPS (M) when the unit is running. Set remaining time before stopping using + / - (J). Each pressure adds or removes half an hour, from 0. [. . . ] Use a dry and wet cloth to clean the outside of the unit. Anti dust air filter: If the anti dust air filter is dirty, the air conditioner will be less performing. Clean the filter at least every two months. At least, replace the filter once a year. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ALPATEC AC 9 FITP
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ALPATEC AC 9 FITP will begin.
