User manual ALPATEC ACS 150 ET

[. . . ] Always place the appliance in a vertical position, in order to maintain the compressor in good working conditions. Never let the appliance in a room with children and handicapped people without supervising. [. . . ] MINUTEUR (timer): Start: press this touch once the product is stop and select the desired time (from 1 to 24 hours). once the time is over , the product starts. Stop: press this touch once the product is on and select the desired time (from 1 to 24 hours). NUIT (night): when setting this function, please set the timer too. This function raise the desired temperature 0, 5°C each half hour during 2 hours maximum in order to ensure sleep comfort. Note: this function is only available with the cooling mode. You can run the product either with the remote control or with the control panel. touch 3: select the mode (cooling or dehumidifying). Touch 4: each pressure increase or lower the temperature by 1°C Touch 5: start or stop the product. Temperature will increase by 0, 5°C after half an hour in this mode, then by 2°C after 2 hours. Press the touch 7 till the time on the screen corresponds to the time you want the product to stop. when the product is OFF , it is possible to set an automatic start. [. . . ] Clean the filter at least every two months. Problems Unit does not work Causes - It is not plugged in - Socket or plug is damaged - Fuse or power cord are damaged - Timer was on Suggest solution - Plug in - Make it changed - Make it repair by a qualified person - Cancel timer Unit stops working automatically No cool in cooling mode When there is something wrong with your unit, contact a qualified person. [. . . ]