User manual ALPATEC B-BC 01

[. . . ] ⷠUnplug the appliance before cleaning or changing any pieces. ⷠDo never introduce metallic objects to avoid any risks of electrical shocks. ⷠNever use accessories that are not recommended or supplied by the manufacturer. It could constitute a danger for the user and could damage the appliance. [. . . ] As all electrical products, a qualified electrician must repair it, as well as the power cord must be changed by an electrician. sPECIAL RECOMMENDATIONS · Do not place any object onto the air outlet (on the back side of appliance). ⷠThe rear of the unit can go quite close to the wall but leave at least 5 cm gap. ⷠDo note place the appliance on soft or uneven ground in order to prevent it from leaking of making noise. ⷠPlace the appliance in order to open easily the ice cube tank and the water tank without needing to remove the appliance. ⷠSwitch off and unplug the appliance when is not used for a long time. 6 1- Water tank 2- Water level indicator 3- Ice box 4- Panel control 5- Ice making chamber 6- Control window 7- Air vent 8- Power cord 9- On/off button 10. 1- Start button : to start the appliance 2- Pause button : to stop the appliance 3- Mode button : to select the ice cube size : small, medium or large 4- Running light indicator 5- Small ice cube model light indicator 6- Medium ice cube model light indicator 7- Large ice cube model light indicator 8- Alarm indicator 25 kg ice cube / day 220 W 230 V 38 dB(A) Step 1: how to fill water. Take the water tank (1) and fill it with fresh potable water. Fill between MIN and MAX and never exceed MAX level. Step 4: how to stop the appliance During the last round, press the PAUSE button (the indicator of the current size will flash for 30s then the running light indicator will flash till the end of the round). Wait for the end of the round, the machine stops working. CAUTION : if the water tank or ice cube tank are not in the right position, or if there is not enough water, the appliance will be on "warning " mode, the alarm light indicator is red flashing. ⷠReleasing function : If the ice maker stops during a round, press start button for more than 3 seconds to release the remaining ice. Ice maker will then start again after you solve the problem. For safety purposes, make sure that the power is on « OFF » position and the appliance is unplugged before any maintenance, repairing or cleaning operation. - Clean the case with a soft and dry cloth. - If the case has accumulated dust or is very dirty, use any mild household cleaner to remove any stubborn stains, then wipe with clean lightly dampened cloth. Do not use alcohol or organic solvent to clean the appliance. Do not use tool to clean ice making chamber, water tank or ice cube tank. [. . . ] Do not use tool to clean ice making chamber, water tank or ice cube tank. ⷠIf you don't use the appliance for a long time, you should empty the water tank and the ice cube tank, and make sure it is dustproof. ⷠWater tank and ice cube tank can not be use as containers. IF YOU DISCOVER THAT YOUR APPLIANCE HAS UNUSUAL SYMPTOMS PLEASE CHECK THE FOLLOWING FIRST : SYMPTOM Alarm indicator flash red without bip Alarm indicator flash red with 2 successive bips Alarm indicator flash red with 3 successive bips Alarm indicator flash red with 4 successive bips Ice cannot come out. [. . . ]