User manual ALPINE 3542 POWER BRIDGE AMPLIFICATOR

[. . . ] 19145 Gramercy Place, Torrance, California 90501, U. S. A. Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF CANADA, INC. 7300 Warden Ave. , Suite 203, Markham, Ontario L3R 9Z6, Canada Phone 1-800-ALPINE-1 (1-800-257-4631) ALPINE ELECTRONICS OF AUSTRALIA PTY. 6-8 Fiveways Boulevarde Keysborough, Victoria 3173, Australia Phone 03-9769-0000 ALPINE ELECTRONICS GmbH Kreuzerkamp 7, 40878 Ratingen, Germany Phone 02102-4550 ALPINE ELECTRONICS OF U. K. [. . . ] Press the BAND button repeatedly until the desired radio band is displayed. Each press changes the band: F1(FM1) F2(FM2) AM 3 3 Press the TUNE/A. ME button repeatedly until "DX SEEK" and "SEEK" disappear from the display. NOTE The initial mode is DX SEEK. 4 Press the g or f button to move downward or upward one step respectively until the desired station frequency is displayed. NOTE The ST indicator or STEREO indicator appears on the display when a Stereo FM station is tuned in. 8-EN Automatic Memory of Station Presets 1 2 3 Press the SOURCE/POWER button to select the radio mode. Press the BAND button repeatedly until the desired radio band is displayed. The frequency on the display continues to change while the automatic memory is in progress. The tuner will automatically seek and store 6 strong stations in the selected band. They will be stored into presets 1 to 6 buttons in order of signal strength. When the automatic memory has been completed, the tuner goes to the station stored in the preset location No. 1. NOTE If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began. Tuning to Preset Stations 1 2 3 Press the SOURCE/POWER button to select the radio mode. Press the BAND button repeatedly until the desired band is displayed. Press the station Preset button that has your desired radio station in memory. The display shows the band, preset number and frequency of the station selected. 9-EN CD Player Operation Inserting/Ejecting Disc SOURCE/ POWER -/J Disc Select buttons (1 through 6) 1 c Insert a CD half way into the slot with the label side facing up. ) button and NOTE In case a 6-disc CD changer is connected : In CD changer mode, press the "F" button to illuminate the "FUNC" indicator and go to step 1. Controlling CD Changer (Optional) If an optional Alpine 6-disc CD Changer is connected to the 8-pin DIN connector (M-Bus) of the 3542 POWER BRIDGE AMPLIFICATOR/CDM-9821, you can control the CD changer using the 3542 POWER BRIDGE AMPLIFICATOR/CDM-9821. NOTE The CD controls designed specifically for CD changer operation are functional only when a CD Changer is interconnected with the 3542 POWER BRIDGE AMPLIFICATOR/CDM-9821. Fast Forward and Backward 1 Press and hold the g or f button to quickly move backward or forward until you reach the desired section of the track. Repeat Play 1 Press the 4 ( ) button to play back repeatedly the track being played. The REPEAT indicator appears and the track will be played repeatedly. ) button again and select OFF to Press the 4 ( deactivate the repeat play. NOTE If a CD Changer is connected and the REPEAT ALL mode is selected, the unit repeatedly plays back all tracks on the disc selected. 1 2 Press the SOURCE/POWER button to activate the CHANGER mode. Press the Disc Select buttons (1 through 6) corresponding to one of the discs loaded in the CD Changer. The selected disc number appears in the display and CD playback starts. NOTES · After selecting the desired disc, you can operate in the same way as for the 3542 POWER BRIDGE AMPLIFICATOR/CDM-9821 CD player. For details, please see the CD Player Operation section. · If the "FUNC" indicator is illuminated the Disc Select buttons become nonfunctional. REPEAT REPEAT ALL (OFF) NOTE In case a 6-disc CD changer is connected : In CD changer mode, press the "F" button to illuminate the "FUNC" indicator and go to step 1. M. I. X. (Random Play) 1 Press the 5 ( ) button in the play or pause mode. indicator will illuminate and the tracks on the disc will be played back in a random sequence. play, press the 5 ( again to turn off the M. I. X. ) button NOTE In case a 6-disc CD changer is connected : In CD changer mode, press the "F" button to illuminate the "FUNC" indicator and go to step 1. 11-EN Information In Case of Difficulty If you encounter a problem, please turn the power off, then on again. [. . . ] Alpine a le choix entre réparer le produit ou le remplacer par un produit neuf ou révisé, le tout sans frais pour vous. Si les réparations sont couvertes par la garantie et si le produit a été envoyé à un centre de service Alpine ou à Alpine, le paiement des frais de réexpédition du produit incombe Alpine. Alpine Électronique de L'Amérique, Inc. , 19145 Gramercy Place, Torrance, California 90501, U. S. A. Alpine Électronique du Canada, Inc. , Suite 203, 7300 Warden Ave. Markham, Ontario L3R 9Z6, Canada LIMITED WARRANTY ALPINE ELECTRONICS OF AMERICA, INC. [. . . ]