User manual ALPINE 3DE-7887R

[. . . ] OWNER'S MANUAL Please read this manual to maximize your enjoyment of the outstanding performance and feature capabilities of the equipment, then retain the manual for future reference. The exclamation point within an equilateral triangle and "WARNING" are intended to alert the user to the presence of important operating instructions. LEM APPEARS El hacer caso omiso de las instruccio- When problems appear, stop using nes podría resultar en heridas graves the system immediately and contact o la muerte. The dealer from whom you purchased the equipment. [. . . ] The unit will stop at the next station it finds. Press the same button again to seek next station. Press and hold any one of the preset buttons (1 through 6) for at least 2 seconds. Press the preset button into which you wish to store the station while the display is blinking (within 5 seconds). The display stops blinking once the station has been memorized. Repeat the procedure to store 5 other stations onto the same band. To use this procedure for other bands, simply select the band desired and follow steps 1 ­ 3 above. A total of 24 stations can be stored in the preset memory (6 stations for each band; FM1, FM2, MW and LW). Note: If you store a station in a preset memory which already has a station, the current station will be cleared and replaced with the new station. This will help in reducing the noise of weak FM Stereo broadcasts. in the monaural mode , the MO indicator appears. Press the MONO button again to return to the stereo mode. The frequency on the display continues to change while the automatic memory is in process. The tuner will automatically seek and store 6 strong stations in the selected band in order of signal strength. When the automatic memory has been completed, the tuner goes to the station stored in the preset location No. Note: If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began. Make sure that the Function indicator illuminates, and press the station preset button that has your desired radio station in memory. The display shows the band, preset number with a triangle and frequency of the station selected. The RDS allows you to receive a variety of information such as traffic information, station names, and to automatically re-tune to a stronger transmitter that is broadcasting the same programme. Note: When the BAND button is pressed and held for more than 2 seconds while a station name is displayed, the display shows the station frequency for 5 seconds. When the RDS station signal received has become weak: AF seek mode, press and hold the AF button for at least 2 seconds to have the unit automatically seek a stronger station in the AF list. If there is no AF station, the display shows "SEEK END. [. . . ] However, most of them will influence the thickness and/or diameter of the disc. Using such accessories can cause the disc to be out of standard specifications and may create operational problems. We recommend not using these accessories on discs played in Alpine CD players. If you encounter a problem, please review the items in the following checklist. [. . . ]