User manual ALPINE CDA-7873

[. . . ] R CDA-7977 FM/AM CD Player CDA-7876 CDA-7875 CDA-7873 FM/AM CD Receiver · OWNER'S MANUAL Please read before using this equipment. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. EN FR ES ES IT ALPINE ELECTRONICS, INC. Tokyo office: 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-8501, Japan Tel. : (03) 3494-1101 ALPINE ELECTRONICS OF AMERICA, INC. [. . . ] Press and hold any one of the Preset buttons (1 through 6) for at least 2 seconds until the station frequency on the display blinks. Press the Preset button into which you wish to store the station while the frequency display is blinking (within 5 seconds). The display stops blinking once the station has been memorized. with a triangle (9) and station frequency memorized. Repeat the procedure to store up to 5 other stations onto the same band. To use this procedure for other bands, simply select the band desired and repeat the procedure. A total of 18 stations can be stored in the preset memory (6 stations for each band; FM1, FM2 and AM). NOTE If you store a station in a preset memory which already has a station, the current station will be cleared and replaced with the new station. 1 2 3 Press the SOURCE button to select the radio mode. Press the BAND button repeatedly until the desired band is displayed. Press the station Preset button that has your desired radio station in memory. The display shows the band, preset number with a triangle and frequency of the station selected. 4 Automatic Memory of Station Presets 1 2 3 Press the SOURCE button to select the radio mode. Press the BAND button repeatedly until the desired radio band is displayed. The frequency on the display continues to change while the automatic memory is in progress. The tuner will automatically seek and store 6 strong stations in the selected band. They will be stored into buttons 1 to 6 in order of signal strength. When the automatic memory has been completed, the tuner goes to the station stored in the preset location No. 1. NOTE If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began. 15-EN CD Player Operation SOURCE -/J g DN f UP M. I. X. REPEAT SCAN c Opening and Closing the Movable display Playback 1 1 Press the c button. The movable display will open. Press the c button. The movable display will open. Insert a disc with the label side facing up. To close the movable display, press the c button again. The movable display will close. NOTES · Do not apply shock to the movable display when it is open as it may result in malfunction of the unit. · The display may be dim during low temperatures and immediately after turning on the power. The brightness will return to normal as time elapses. · The display will stop at the set angle when closing. [. . . ] ("Alpine"), are dedicated to quality craftsmanship and are pleased to offer this Warranty. Should you have any questions, please contact your Dealer or Alpine at one of the telephone numbers listed below. [PRODUCTS COVERED: This Warranty covers Car Audio/Visual Products and Related Accessories ("the product"). Products purchased in the Canada are covered only in the Canada. are covered only in the U. S. A. 2 You should provide a detailed description of the problem(s) for which service is required. [. . . ]