User manual ALPINE CDA-9856R

[. . . ] FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/ PARA USO EN AUTOMÓVILES/SOLO PER L'UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK R RDS MP3/WMA CD Receiver EN CDA-9857R CDA-9856R · OWNER'S MANUAL Please read before using this equipment. · BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. [. . . ] · This function is inoperable when DEFEAT is set to ON. · If you press or in the bass control mode, the unit changes to the treble control mode. *1 The adjustment can also be made by pressing the MODE. Refer to "Adjusting Bass/Treble/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat" (page 15). 15-EN Setting the Treble Control You can change the Treble Frequency emphasis to create your own tonal preference. Other Functions 1 2 Press MENU to select the BASS ENGINE mode, then press MODE. BASS ENGINE SETUP RETURN (OFF) BASS ENGINE Press or to select the TREBLE (treble Centre frequency) control mode. FUNC. BASS TREBLE TITLE Setting the Treble Centre Frequency 3-1 Press SOURCE/POWER to select the desired treble Centre frequency. 10. 0kHz 12. 5kHz 15. 0kHz 7. 5kHz 10. 0kHz Displaying the Text Text information, such as the disc name and the track name, will be displayed if playing a CD text compatible disc. It is also possible to display the folder name, the file name, and the tag, etc. , while playing MP3/WMA files. Emphasizes the displayed Treble frequency ranges. Setting the Treble Level Press TITLE. The display will change every time the button is pressed. The display in Radio mode: If there is PS (Programme Service Name) PS(Programme Service Name) *1 (Blank) 3-2*2Turn the Rotary encoder to select the desired treble level (­7~+7). You can emphasize the treble level. 4 Press MENU to select RETURN. After 2 seconds, the unit returns to normal mode. Pressing and holding MENU for at least 2 seconds will return to normal mode. PS(Programme Service Name)*1 CALENDAR/CLOCK PS(Programme Service Name)*1 PTY (Programme Type) · If no operation is performed within 60 seconds, the treble control setting will be turned off automatically. · The treble level settings will be individually memorized for each source (FM, MW (LW), CD, etc. ) until the setting is changed. The Treble frequency settings adjusted for one source are effective for all other sources (FM, MW (LW), CD, etc. ). · Depending on the connected devices, some functions and display indications do not work. However, Treble Level is still adjustable if an audio processor with the Treble function is connected. · This function is inoperable when DEFEAT is set to ON. · If you press or in the treble control mode, the unit changes to the bass control mode. *2 The adjustment can also be made by pressing the MODE. Refer to "Adjusting Bass/Treble/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat" (page 15). Radio Text Radio Text (Blank) (Blank) PS(Programme Service Name) *1 (Blank) If there is no PS (Programme Service Name) Turning Loudness On/Off Loudness introduces a special low- and high-frequency emphasis at low listening levels. This compensates for the ear's decreased sensitivity to bass and treble sound. FREQUENCY (Blank) FREQUENCY CALENDAR/CLOCK Radio Text Radio Text FREQUENCY PTY (Programme Type) Press and hold MODE for at least 2 seconds to activate or deactivate the loudness mode. "((LOUD))" indicator lights. (Blank) (Blank) FREQUENCY (Blank) 16-EN The display in CD mode: TEXT (TRACK NAME) *2 TRACK NO. /ELAPSED TIME About the indication display When displaying Text, the following indicators are lit according to the mode. Indicator/Mode CD Mode -- -- MP3/WMA Mode Folder Name being displyed Song Name being displayed Artist Name being displayed Album Name being displayed File Name being displayed -- iPod Mode -- Song Name being displayed Artist Name being displayed Album Name being displayed -- -- TEXT (DISC NAME)* 2 TEXT (TRACK NAME) *2 TEXT (TRACK NAME)*2 CALENDAR/CLOCK -- -- (Blank) (Blank) TEXT (TRACK NAME) *2 TRACK NO. /ELAPSED TIME -- Text (Disc Name) being displayed The display in MP3/WMA mode: FILE NAME*3 FOLDER NO. /FILE NO. /ELAPSED TIME FOLDER NAME*3 FILE NAME*3 Text (Track Name) being displayed -- -- *5 ARTIST NAME*4 SONG NAME*4 4 *5 ALBUM NAME*4 SONG NAME*4 About "Text" Text: Text compatible CDs contain text information such as the disc name and track name. Such text information is referred to as "text. " SONG NAME* (Blank) (Blank) CALENDAR/CLOCK SONG NAME*4 FOLDER NO. /FILE NO. /ELAPSED TIME FILE NAME*3 FOLDER NO. /FILE NO. /ELAPSED TIME · Some characters may not be displayed correctly with this device, depending on the character type. · The CD changer must also be CD Text compatible for the Text information to be displayed. · When the Scroll Setting (page 20) is set to "Text Scroll Manual, " press and hold TITLE for at least 2 seconds to scroll the Text information only once (TEXT DISPLAY, FOLDER NAME DISPLAY, FILE NAME DISPLAY or TAG DISPLAY mode, etc. ). · "NO SUPPORT" is displayed when the desired text information cannot be displayed on this unit. · The text or tag information may not be correctly displayed, depending on the contents. *1 Press and hold TITLE for at least 2 seconds if PS is displayed in the radio mode, "FREQUENCY" will be displayed for 5 seconds. *2 Displayed during playback of a disc with CD Text. [. . . ] When no device is connected, leave the switch in the NORM position. · Be sure to turn the power off to the unit before changing the switch position. Battery Lead (Yellow) Connect this lead to the positive (+) post of the vehicle's battery. Power Supply Connector Ai-NET Cable (Included with CD Changer) RCA Extension Cable (Sold Separately) ISO/JASO Antenna Adaptor (Sold Separately) An ISO/JASO antenna adapter may be required, depending on the vehicle. ISO Power Supply Connector ISO Connector (Speaker Output) Left Rear (+) Speaker Output Lead (Green) Left Rear (­) Speaker Output Lead (Green/Black) To prevent noise/interference in the audio system. · Locate the unit and route the leads at least 10 cm away from the car harness. · Keep the battery power leads as far away from other leads as possible. [. . . ]