User manual ALPINE CDE-126BT

[. . . ] FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/PARA USO EN AUTOMÓVILES/SOLO PER L'UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK/ALLEEN VOOR GEBRUIK IN DE AUTO/ /DO UYCIA TYLKO W SAMOCHODZIE/ EN R MP3/WMA/AAC CD RECEIVER WITH BLUETOOTH® DE CDE-126BT MP3 CD RECEIVER WITH BLUETOOTH® FR CDE-125BT ES · OWNER'S MANUAL Please read before using this equipment. · BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. [. . . ] SCR MANU: The display is scrolled when a disc is loaded or when a track is changed, etc. Setting the Subwoofer System Select either SYS 1 or SYS 2 for the desired subwoofer effect. Setting item: SUBW SYS Setting contents: SUBW SYS 1 (Initial setting) / SUBW SYS 2 SUBW SYS 1: Subwoofer level changes according to the main volume setting. SUBW SYS 2: Subwoofer level change is different from the main volume setting. For example, even at low volume settings, the subwoofer is still audible. Note · The unit scrolls CD text names, folder names, file names or tag display. Demonstration This unit has a demonstration feature for the display. Setting item: DEMO Setting contents: DEMO ON / DEMO OFF (Initial setting) Note · To quit Demo mode, set to DEMO OFF. 18-EN Setting the Language (CYRILLIC) Set the language to be displayed on the unit. External Device Connecting to an External Amplifier (POWER IC) When an external amplifier is connected, sound quality can be improved by stopping the power supply of the built-in amplifier. Setting item: CYRILLIC Setting contents: OFF (Initial setting) / ON OFF : English, Latin character ON : Russian, English Setting item: POWER IC Setting contents: POW ON (Initial setting) / POW OFF POW ON : The speakers are driven by the built-in amplifier. POW OFF : Use this mode when the line output of this unit is used to drive an external amplifier. In this setting, the head unit's internal amplifier is turned OFF and cannot drive speakers. POW ON : Note · Refer to the table below for the Russian display on this unit. D: C: DC DC DC DC Speakers SPEAKER RIGHT FRONT Front right SPEAKER RIGHT REAR Rear right SPEAKER LEFT REAR Rear left SPEAKER LEFT FRONT Front left MP3/WMA/AAC Playing MP3 Data (PLAY MODE) This unit can play back CDs containing both CD and MP3/WMA/AAC data (created in Enhanced CD (CD Extra) format). However, in some situations, playback of an enhanced CD may be difficult. In this case, you can select playback of a single session only, containing the CD data. When a disc contains both CD and MP3/WMA/AAC data, playback starts from the CD data portion of the disc. POW OFF : CDE-126BT: Amplifier Front left Front right Rear left Rear right Amplifier Setting item: PLAY MODE Setting contents: CD-DA (Initial setting) / CDDA/MP3 CD-DA: Only the CD data in Session 1 can be played back. CDDA/MP3: CD data, MP3/WMA/AAC files in mixed mode, and multi-session discs can be played back. CDE-125BT: Amplifier Front left Front right Note · No sound is produced by the system when the power output is set to OFF. Note · Perform this setting before inserting a disc. If a disc has already been inserted, remove it first. 19-EN Setting the AUX+ SETUP Mode An external device (such as a portable music player) can be connected to the Full Speed connector of this unit. A conversion cable (KCE-237B) for build up the AUX IN (optional) is required. A portable music device and an iPod/iPhone cannot be connected to the Full Speed connector at the same time. BT Hands-Free Calling /VOICE DIAL Rotary encoder 1/AF (ABC) 2 (ABC) Setting item: AUX+ SETUP Setting contents: AUX+ ON / AUX+ OFF (Initial setting) AUX+ ON* : Set to ON when a portable device is connected. If SOURCE is pressed and AUX+ is selected, the sound of the portable device is input to the unit. * You can change the AUX+ name display when AUX+ is set to ON. Press ENT when AUX+ is set to ON, and select AUX+ NAME by turning the Rotary encoder, then press ENT. After that, turn the Rotary encoder to select the desired AUX+ name. AUX+ OFF: Set to OFF when an iPod/iPhone is connected. /ENT FUNC. /SETUP Setup Before Using About BLUETOOTH BLUETOOTH is a wireless technology allowing communication between a mobile device or personal computer over short distances. This enables a hands-free call or data transmission between BLUETOOTH compatible devices. Setting the AUX NAME mode You can change the AUX NAME display in the SETUP mode. Setting item: AUX NAME Setting contents: AUXILIARY*1 (Initial setting) / TV / DVD / PORTABLE*2 / GAME *1 After the setting is completed, AUX is displayed on the unit. *2 After the setting is completed, PMD is displayed on the unit. Notes · Depending on the BLUETOOTH version, a BLUETOOTH compatible device may not be able to communicate with this unit. · Proper function of this unit with all BLUETOOTH compatible devices is not guaranteed. For handling of the BT compatible device, consult your ALPINE dealer or ALPINE website. · Depending on the surroundings, BLUETOOTH wireless connection may be unstable. · When you place a call, or perform setup operations, be sure to stop your car in a safe place. [. . . ] · Mount the microphone in a location where the driver's voice can easily be picked up. Choose a location for the microphone that can easily pick up the drivers voice. Requiring the driver to move towards the microphone for audibility causes a distraction that could be dangerous. Hex Nut (M5) This unit * For the screw*, provide a proper screw to the location. chassis installing 3 Slide the CDE-126BT/CDE-125BT into the dashboard. When the unit is in place, make sure the locking pins are fully seated in the down position. [. . . ]