User manual ALPINE CDE-9872RE

[. . . ] FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/PARA USO EN AUTOMÓVILES/SOLO PER L'UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK/ALLEEN VOOR GEBRUIK IN DE AUTO/ /DO UYCIA TYLKO W SAMOCHODZIE/ EN R RDS MP3 CD Receiver DE CDE-9874R/CDE-9874RR/ CDE-9874RB/CDE-9872R/ CDE-9872RM/CDE-9872RE · OWNER'S MANUAL Please read before using this equipment. · BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. [. . . ] This compensates for the ear's decreased sensitivity to bass and treble sound. The function is inoperable when DEFEAT is set to ON. *1 When the subwoofer mode is set to OFF, its level cannot be adjusted. *2 CDE-9872 Series only. 13-EN 2 Turn the Rotary encoder (CDE-9874 Series only) or and (CDE-9872 Series only) until the press desired sound is obtained in each mode. By setting DEFEAT ON, previously adjusted settings of BASS and TREBLE will return to the factory defaults. *1 The adjustment can also be made by pressing Rotary encoder (CDE-9874 Series only) or /AUDIO (CDE-9872 Series only). Refer to "Adjusting Bass/Treble/Balance (Between Left and Right)/ Fader (Between Front and Rear)/Loudness/Defeat" (page 13). By using Loudness on the CDE-9874 Series Press and hold Rotary encoder (LOUD) for at least 2 seconds to activate or deactivate the loudness mode. Setting the Treble Control You can change the Treble Frequency emphasis to create your own tonal preference. 1-1 Press and hold SOUND for at least 2 seconds to activate the Sound Setting mode (CDE-9872 Series only). Setting the Bass Control You can change the Bass Frequency emphasis to create your own tonal preference. 1-2 Press BASS 1-1 Press and hold SOUND for at least 2 seconds to activate the Sound Setting mode (CDE-9872 Series only). /SOUND (CDE-9874 Series only) or SOUND (CDE-9872 Series only) repeatedly to select the TREBLE mode. TREBLE HPF BASS Setting the Treble Centre Frequency 1-2 Press BASS /SOUND (CDE-9874 Series only) or SOUND (CDE-9872 Series only) repeatedly to select the BASS mode. TREBLE HPF BASS 2-1 Press BAND/TA to select the desired treble centre frequency. 10. 0 kHz 12. 5 kHz 15. 0 kHz 17. 5 kHz 10. 0 kHz Emphasises the displayed treble frequency ranges. Setting the Bass Centre Frequency 2-1 Press BAND/TA to select the desired bass centre frequency. 80 Hz 100 Hz 200 Hz 60 Hz 80 Hz Setting the Treble Level 2-2* Turn the Rotary encoder (CDE-9874 Series only) 2 and (CDE-9872 Series only) to select or press the desired treble level (­7~+7). You can emphasise the treble level. Emphasises the displayed bass frequency ranges. Setting the Bass Bandwidth 3 Press and hold /ESC for at least 2 seconds to return to normal mode. 2-2 Press SOURCE/ bandwidth. to select the desired bass · If no operation is performed for 15 seconds, the unit will return to normal mode automatically. · The treble level settings will be individually memorized for each source (FM, MW (LW), CD, etc. ) until the setting is changed. The Treble frequency settings adjusted for one source are effective for all other sources (FM, MW (LW), CD, etc. ). · The function is inoperable when DEFEAT is set to ON. *2 The adjustment can also be made by pressing Rotary encoder (CDE-9874 Series only) or /AUDIO (CDE-9872 Series only). Refer to "Adjusting Bass/Treble/Balance (Between Left and Right)/ Fader (Between Front and Rear)/Loudness/Defeat" (page 13). Changes the boosted bass bandwidth to wide or narrow. A wider setting will boost a wide range of frequencies above and below the centre frequency. A narrower setting will boost only frequencies near the centre frequency. Setting the Bass Level 2-3* Turn the Rotary encoder (CDE-9874 Series only) 1 or press and (CDE-9872 Series only) to select the desired bass level (­7~+7). You can emphasise or weaken the bass level. 3 Press and hold /ESC for at least 2 seconds to return to normal mode. · If no operation is performed for 15 seconds, the unit will return to normal mode automatically. · The bass level settings will be individually memorized for each source (FM, MW (LW), CD, etc. ) until the setting is changed. The bass frequency and bass bandwidth settings adjusted for one source are effective for all other sources (FM, MW (LW), CD, etc. ). · The function is inoperable when DEFEAT is set to ON. 14-EN Adjusting the High Pass Filter The High Pass Filter on this unit can be adjusted to suit your personal taste. Other Functions CDE-9874 Series SOURCE/ 1-1 Press and hold SOUND for at least 2 seconds to activate the Sound Setting mode (CDE-9872 Series only). 1-2 Press BASS /SOUND (CDE-9874 Series only) or SOUND (CDE-9872 Series only) repeatedly to select the HPF mode. TREBLE HPF BASS VIEW 2 Turn the Rotary encoder (CDE-9874 Series only) or press and (CDE-9872 Series only) to select the desired HPF frequency. OFF 80 Hz 120 Hz 160 Hz CDE-9872 Series SOURCE/ All frequencies above the selected cutoff are output. 3 Press and hold /ESC for at least 2 seconds to return to normal mode. · If no operation is performed for 15 seconds, the unit will return to normal mode automatically. · The function is inoperable when DEFEAT is set to ON. VIEW Displaying the Text Text information, such as the disc name and the track name, will be displayed if playing a CD text compatible disc. It is also possible to display the folder name, the file name and the tag, etc. , while playing MP3 files. Press VIEW. The display will change every time the button is pressed. · When the TEXT SCR is set to SCR MANU, press and hold VIEW for at least 2 seconds, the current text will be scrolled one time (except Radio mode). The display in Radio mode: If there is PS (Programme Service Name) PS (Programme Service Name)*1 PS (Programme Service Name) RADIO TEXT If there is no PS (Programme Service Name) FREQUENCY RADIO TEXT FREQUENCY The display in CD mode: TRACK NO. /ELAPSED TIME TEXT (DISC NAME)*2 TEXT (TRACK NAME)*2 TRACK NO. /ELAPSED TIME The display in MP3 mode: FILE NO. /ELAPSED TIME FOLDER NO. /FILE NO. FOLDER NAME FILE NAME ARTIST NAME*3 3 ALBUM NAME* SONG NAME*3 FILE NO. /ELAPSED TIME The display in BT AUDIO mode: The Following display will be shown only when a telephone or Bluetooth Streaming device with Metadata capabilities is correctly connected with a Bluetooth Interface Module (Alpine KCE-300BT) (sold separately). (For details about Bluetooth Box, refer to the Owner's Manual of KCE-300BT). 15-EN PRESET NO. ARTIST NAME*3 SONG NAME*3 PRESET NO. ALBUM NAME*3 *1 If VIEW is pressed and held for at least 2 seconds in the PS display mode, frequency will be displayed for 5 seconds. *2 Displayed during playback of a disc with CD text. [. . . ] Slide the mounting sleeve into the dashboard and fix it with the metal shackles. 26-EN Removal 1. Use a small screwdriver (or similar tool) to push the locking pins to the "up" position (see above drawing). As each pin is unlocked, gently pull out on the unit to make sure it does not re-lock before unlocking the second pin. Pull the unit out, keeping it unlocked as you do so. <JAPANESE CAR> Front Frame This unit Screw (M5 × 8) (Included) Mounting Bracket 27-EN Connections To iPod Antenna JASO Antenna Plug ISO Antenna Plug (Pink/Black) AUDIO INTERRUPT IN To vehicle phone (Blue/White) REMOTE TURN-ON To amplifier or equalizer To power antenna (Red) IGNITION To the instrument cluster illumination lead (Black) GND (Blue) POWER ANT Ignition Key CDE-9874RB only (Orange) DIMMER BATTERY (Yellow) (Green) (Green/Black) (White) Battery Speakers Rear Left Front Left (White/Black) (Grey/Black) Front Right (Grey) (Violet/Black) (Violet) Rear Right Speakers CDE-9874 Series only Amplifier Front Left Front Right CDE-9874 Series: Rear or Subwoofers*1 CDE-9872 Series: Front or Subwoofers*2 Amplifier CDE-9874 Series only *1 When Subwoofer is OFF: Output is for Rear speakers. [. . . ]