User manual ALPINE CDE-9880R

[. . . ] FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/PARA USO EN AUTOMÓVILES/SOLO PER L'UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK/ALLEEN VOOR GEBRUIK IN DE AUTO/ /DO UYCIA TYLKO W SAMOCHODZIE/ EN R RDS MP3/WMA/AAC CD Receiver DE CDE-9880R/ CDE-9882Ri · OWNER'S MANUAL Please read before using this equipment. · BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. [. . . ] This device also can play back USB memory media. Corresponding File Systems This device supports discs formatted with ISO9660 Level 1 or Level 2. Under the ISO9660 standard, there are some restrictions to remember. The maximum nested folder depth is 8 (including the root directory). The number of characters for a folder/file name is limited. Valid characters for folder/file names are letters A-Z (all caps), numbers 0-9, and `_' (underscore). This device also can play back discs in Joliet, Romeo, etc. , and other standards that conform to ISO9660. However, sometimes the file names, folder names, etc. , are not displayed correctly. This device also supports FAT 12/16/32 for USB memory device. Formats supported This device supports CD-ROM XA, Mixed Mode CD, Enhanced CD (CD-Extra) and Multi-Session. This device cannot correctly play back discs recorded with Track At Once or packet writing. Folder MP3/WMA/AAC File * The folder No. /folder Name will not be displayed if no file is contained in the folder. Terminology Bit rate This is the "sound" compression rate specified for encoding. The higher the bit rate, the higher the sound quality, but also the larger the files. Sampling rate This value shows how many times per second the data is sampled (recorded). For example, music CDs use a sampling rate of 44. 1 kHz, so the sound is sampled (recorded) 44, 100 times per second. The higher the sampling rate, the higher the sound quality, but also the larger the volume of data. Encoding Converting music CDs, WAVE (AIFF) files, and other sound files into the specified audio compression format. Tag Song information such as track titles, artist names, album names, etc. , written into MP3/WMA/AAC files. Root folder The root folder (or root directory) is found at the top of the file system. The root folder contains all folders and files. It is created automatically for all burned discs. 14-EN Sound Setting Rotary encoder (AUDIO/LOUD) SOURCE/ /ENT BAND/TA *1 When the subwoofer mode is set to OFF, its level cannot be adjusted. The adjustment can also be made by pressing Rotary encoder (AUDIO). Refer to "Adjusting Subwoofer Level/Bass Level/Treble Level/Balance (Between Left and Right)/Fader (Between Front and Rear)/Defeat" (page 15). *2 The function is inoperable when DEFEAT is set to ON. Setting the Bass Control You can change the Bass Frequency emphasis to create your own tonal preference. SOUND /ESC 1 2 Press SOUND to activate the Sound Setting mode. Turn the Rotary encoder to select the BASS Adjustment mode, and then press /ENT. SUBW LEVEL*3 SUBW LEVEL BASS*4 TREBLE*4 HPF*4 Adjusting Subwoofer Level/Bass Level/ Treble Level/Balance (Between Left and Right)/Fader (Between Front and Rear)/ Defeat Setting the Bass Centre Frequency 3-1 Press BAND/TA to select the desired bass centre frequency. 80 Hz 100 Hz 200 Hz 60 Hz 80 Hz 1 Press Rotary encoder (AUDIO) repeatedly to choose the desired mode. Each press changes the mode as follows: SUBW LEVEL* BASS LEVEL BALANCE FADER DEFEAT Subwoofer level : 0 ~ +15 Bass level: ­7 ~ +7 Treble level: ­7 ~ +7 Balance : L15 ~ R15 Fader : R15 ~ F15 Defeat : ON/OFF Volume : 0 ~ 35 TREBLE LEVEL VOLUME SUBW LEVEL Emphasizes the displayed bass frequency ranges. Setting the Bass Bandwidth 3-2 Press SOURCE/ bandwidth. to select the desired bass · If no operation is performed for 5 seconds after selecting the SUBW LEVEL, BASS LEVEL, TREBLE LEVEL, BALANCE, FADER or DEFEAT mode, the unit automatically returns to normal mode. * When the subwoofer mode is set to OFF, its level cannot be adjusted. Refer to "Turning Subwoofer ON/OFF" (page 16). Changes the boosted bass bandwidth to wide or narrow. [. . . ] This can be done by pressing firmly in on the unit while pushing the locking pin down with a small screwdriver. This ensures that the unit is properly locked and will not accidentally come out from the dashboard. Install the detachable front panel. Lock Pin Pressure Plates* This unit Removal 1. Use a small screwdriver (or similar tool) to push the locking pins to the "up" position (see above drawing). [. . . ]