User manual ALPINE CDM-7870R

[. . . ] R CDM-7870R FM/MW/L W/RDS CD Receiver EN TDM-7585R FM/MW/L W/RDS Cassette Receiver · OWNER'S MANUAL Please read before using this equipment. · BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. [. . . ] · If the volume level is changed while receiving traffic information, the changed volume level will be memorized. When traffic information is received next time, the volume level will be automatically adjusted to the level memorized. FR 5 PTY (Programme Type) Tuning 1 2 ES Press the F button so that the F indicator lights up. Press the PTY button to activate the PTY mode. The Programme Type of the station being currently received will be displayed for 5 seconds. · If there is no receivable PTY broadcast, "NO PTY" will be displayed for 5 seconds. · If no RDS station can be received the display shows "NO RDS. " NOTE If no button is pressed within 5 seconds after pressing the PTY button, the PTY mode will be automatically cancelled. DE Receiving RDS Regional (Local) Stations 1 2 Press and hold the SETUP button for at least 3 seconds to activate the setting mode. Press the g DN or f UP button to select the REG (Regional) mode. FM LV REG SUB AUX 100kHz/50kHz Press the BAND button to turn on or off the REG (Regional) mode. In the REG OFF mode, the unit automatically keeps receiving the related local RDS station. Press the SETUP button to deactivate the setting mode. 3 3 4 1 2 Press the g DN and f UP buttons within 5 seconds after activating the PTY mode to choose the desired programme type while the PTY (programme type) is being displayed. Each press scrolls the programme type by one. LIGHT M CLASSICS OTHER M IT 4 Press the PTY button within 5 seconds after selecting the programme type to start searching for a station in the selected programme type. The chosen programme type indicator blinks during searching and lights when a station is found. If no PTY station is found, "NO PTY" will be displayed for 2 seconds. SE Receiving Traffic Information Press the T. INFO button repeatedly until the T. INFO indicator appears in the display. Press the g DN or f UP button to select your desired traffic information station. When a traffic information station is tuned in, the TP indicator lights up. 5 Press the F button to activate the normal mode. The F indicator light goes out. 13-EN RDS T. INFO CDM-7870R g DN f UP F T. INFO NEWS TDM-7585R g DN f UP F NEWS RDS Operation Receiving Traffic Information While Playing CD/Tape or Radio 1 2 Press the T. INFO button repeatedly until the T. INFO indicator appears in the display. Press the g DN and f UP buttons to select a traffic information station if necessary. · When a traffic information broadcast starts, the unit automatically mutes the CD player/ changer or the cassette player or the regular FM broadcast. · When the traffic information broadcast finishes, the unit automatically returns to the original source play before the traffic information broadcast began. When traffic information stations cannot be received: In the tuner mode: When the TP signal can no longer be received for over 1 minute, the "T. INFO" indicator blinks. In the CD mode: When the TP signal can no longer be received, the traffic information station of another frequency will be selected automatically. NOTE The receiver is equipped with the EON (Enhanced Other Networks) function in order to keep track of additional alternate frequencies to the AF list. The EON indicator appears while an RDS EON station is being received. [. . . ] / " Green Green/Black Rear Left White White/Black Grey/Black Grey Front Left Front Right Violet/Black Violet Rear Right Speakers Rear or Subwoofers CD changer (Sold separately) : Amplifier When Subwoofer is set to OFF: Output is from Rear speakers. When Subwoofer is set to ON: Output is from Subwoofer. For details on how to set the Subwoofer to ON/OFF, see "Subwoofer On and Off" on page 6. 26-EN 1 Antenna Receptacle Connect to the supplied ISO antenna convertor plug. 2 Audio Interrupt In Lead (Pink/Black) Connect this lead to the Audio Interface output of a cellular phone which provides ground shorting when a call is received. If a device having the interrupt feature is connected, audio will be automatically muted whenever the interrupt signal is received from the device. [. . . ]