User manual ALPINE CDM-9821

[. . . ] R EN CDM-9823 CDM-9821 FM/AM Compact Disc Receiver · OWNER'S MANUAL Please read before using this equipment. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. FR ES ES IT ALPINE ELECTRONICS MARKETING, INC. 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-0031, Japan Phone 03-5496-8231 ALPINE ELECTRONICS OF AMERICA, INC. [. . . ] The display shows the band, preset number and frequency of the station selected. 9-EN CD Player Operation Inserting/Ejecting Disc SOURCE/ POWER -/J Disc Select buttons (1 through 6) 1 c Insert a CD half way into the slot with the label side facing up. The player automatically draws the disc into the disc compartment. g f 4 5 6 The Disc indicator appears to show that a disc is loaded. NOTE Three-inch (8cm) CD's can be used. About playable media. Use only compact discs with the label side showing the CD logo marks below. 2 Press the c(Eject) button when you want to eject the CD. NOTES · If the CD is not removed for several seconds after it has been ejected, the player automatically draws the CD into the compartment to protect the CD. · Do not insert or remove a CD forcibly when loading or ejecting a CD, as malfunction may result. If you use unspecified compact discs, correct performance cannot be guaranteed. You can play CD-Rs (CD-Recordable)/CD-RWs (CDReWritable) for audio use on this unit. However, you cannot play CD-Rs/CD-RWs containing MP3 formatted audio files. · Some of the following CDs may not play on this unit: Flawed CDs, CDs with fingerprints, CDs exposed to extreme temperatures or sunlight (e. g. , left in the car or this unit), CDs recorded under unstable conditions, CDs not designed for audio use, CDs on which a recording failed a re-recording was attempted, copyprotected CDs which do not conform to the audio CD industry standard. Normal Play and Pause 1 Insert a CD. The CD player begins playback from the first track on the disc. On handling Compact Discs (CD/CD-R/ CD-RW) · Do not touch the surface. · Do not expose the disc to direct sunlight. · Do not affix stickers or labels and do not write on the surface. · Clean the disc when it is dusty. · Make sure that there are no bumps around the disc. · Do not use commercially available disc accessories. The display shows the track number. When the last track is played back the player returns to the first track. If a CD is already loaded in the CD player, press the SOURCE button to select the CD mode. 2 Do not leave the disc in the car or the unit for a long time. Never expose the disc to direct sunlight. Heat and humidity may damage the CD and you may not be able to play it again. Press the -/J button to temporarily stop CD playback. To resume playback, press the -/J button again. To customers using CD-R/CD-RW · If a CD-R/CD-RW cannot be played back, make sure close session (finalization) has been performed. · Finalize the CD-R/CD-RW if necessary, and attempt playback again. 10-EN Music Sensor (Skip) Scanning Programs 1 Momentarily press the g button once during CD play to return to the beginning of the current track. If you wish to access the beginning of a track further back, repeatedly press until you reach the desired track. Press the f button once to advance to the beginning of the next track. If you wish to access the beginning of a track further ahead, press repeatedly until the desired track is reached. NOTE The music sensor feature is functional in the play or pause mode. 1 Press the 6 ( ) button to activate the Scan mode. The first 10 seconds of each track will be played back in succession. [. . . ] ("Alpine"), are dedicated to quality craftsmanship and are pleased to offer this Warranty. Should you have any questions, please contact your Dealer or Alpine at one of the telephone numbers listed below. [PRODUCTS COVERED: This Warranty covers Car Audio/Visual Products and Related Accessories ("the product"). Products purchased in the Canada are covered only in the Canada. are covered only in the U. S. A. 2 You should provide a detailed description of the problem(s) for which service is required. [. . . ]