User manual ALPINE CHA-1214

[. . . ] the CHA-1214 should be mounted to a stable surface. If no stable surface is available, you must build a mounting board for the Shuttle. Choose a location which allows easy access to insert and remove the CD magazine. determine the mounting location and position. [. . . ] Doing so may result in personal injury or damage to the equipment. Before making electrical connections, make sure that your car uses this type of system. Use of other than designated parts may damage this unit internally or may not securely install the unit in place as parts that come loose may create hazards. dO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST. A high incidence of moisture or dust that penetrates into this unit may cause smoke or fire. When installation and connections are completed, · Are proper with klaxon, etc. 1 Ai-NET Input connector 2 Ai-NET Cable 3 Head unit equipped with Ai-NET connector 4 Connect as shown 5 Input/Output Labels 6 Match the arrow marks first, then connect. Proper care of your disc/Entretien des disques compacts/Cuidado adecuado de su disco Choose the proper mounting holes on the brackets to the mounting angle. Use the hexagon washer-head bolts (M4 x 8) to fasten the two "L" type mounting brackets (supplied) to the sides of the CD Shuttle. Note: If you plan to mount the changer at an angle, make sure that the magazine will not fall out when ejected. Have your hand ready to stop the magazine if it falls, then, press the EJECT button. If the magazine falls out of the changer when it is ejected, adjust mounting angle upwards. This will prevent damage to the magazine or its contents. Hold the disc so you will not leave fingerprints on the surface. if the surface is scratched , it may cause the pickup to skip. Do not affix tape, paper, or gummed labels on the disc. For routine cleaning, wipe the playing surface with a clean, soft cloth from the center of the disc to the outer edge. If the surface is heavily soiled, dampen a clean, soft cloth in a solution of mild neutral detergent before cleaning the disc. 3) Various disc accessories for protecting the surface of the disc and improving sound quality are available on the market. However, many of them will increase the thickness and/or diameter of the disc. Using such accessories may place the disc beyond the specified size limitations and cause the changer to malfunction. Because of the high precision electronics of the CHA-1214 and the highly stable mechanism, these accessories are not necessary and therefore not recommended for use with discs placed in the CHA-1214. [. . . ] Be sure to insert 12 CD trays whether the disc is loaded or not. Make sure the CD trays are inserted straight to prevent jamming (Fig. Insert the CD magazine 1 all the way into the Shuttle until it locks with the narrow side facing the unit as shown in Fig. 7) Caution: Door must be completely closed and remained closed at all times to prevent dust, water and smoke contaminants from diminishing the overall performance of the CD Shuttle. [. . . ]