User manual ALPINE CHM-S655RF

[. . . ] Rupture or chemical leakage from the battery may cause fire or personal injury. Be sure the temperature inside the vehicle is between +60°C (+140°F) and ­10°C (+14°F) before turning your unit on. Do not attempt to play cracked, warped, or damaged discs. Playing a bad disc could severely damage the playback mechanism. [. . . ] ceci évitera que les bruits · Electrical pop noises from entering the de crachement électrique entrent dans le system. Once you are sure all connections are · Après la vérification des connexions, vous proper, you may turn the unit on. Make the selection while the Frequency mode is displayed. Select a frequency that is not used by a strong, local FM station. This will prevent interference while listening to CD. To listen to an FM broadcast, turn down the volume of the radio then turn power off to the CHM-S665RF. Tune the radio to your desired station and adjust the volume to your preference. Turn power off from the Remote Display or Wireless Remote Control. The display shows the disc number and track number. Note: After the last track on the last disc Remarque: Lorsque la dernière plage sur le is played, the optical pickup dernier disque a été lue, la tête returns to disc 1. Playback will optique de lecture revient au continue from the beginning of disc disque 1. Press the 8 or 9 button until your desired disc number appears in the display. With this feature, you can get to the beginning of the music track of your choice simply and quickly. Momentarily press the c DN button once to return to the beginning of the current track. If you wish to access a track further back, repeatedly press until you reach the desired track. Press the UP f button once to advance to the beginning of the next track. If you wish to access a track further ahead, press repeatedly until the desired track is reached. The audible Fast Forward/Fast Backward feature works only in the play mode. This feature is convenient to access a specific passage within a musical track. Fast Forward/Fast Backward also works in the Pause mode, although it will not be audible. The pickup will quickly move backward or forward until you reach the desired section of the track. When the pickup reaches the end of the disc in the Fast Forward mode, the unit will go into the pause mode. [. . . ] ­ Clean the CD being very careful not to scratch it. ­ The indicator will disappear when the temperature returns to within operation range. If there appears to be no problems with the disc, insert the CD back into the magazine. When the "E-01" indication disappears from the display, insert the magazine into the unit. [. . . ]