User manual ALPINE IVA-D100

[. . . ] R Mobile Multimedia Station EN IVA-D100 FR TM DIGITAL VIDEO ES · OWNER'S MANUAL Please read before using this equipment. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. ALPINE ELECTRONICS MARKETING, INC. 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-0031, Japan Phone 03-5496-8231 ALPINE ELECTRONICS OF AMERICA, INC. [. . . ] If a new code number is input, this code number will be replaced. Setting the DVD-Audio Playback Mode To playback the DVD Audio Disc, you have a choice of 3 different settings. If the disc containing DVD Video and Audio, set VCAP (Video Capable Audio Player) or VOFF (Video OFF) to playback the DVD Audio. Setting item: DVD-A SETUP Setting contents: VIDEO / VCAP / VOFF VIDEO: VCAP: VOFF: 4:3 PAN-SCAN: Select this when connected to a conventional 4:3 size monitor. The picture will fill the entire TV screen. However, due to the mismatch in aspect ratio, parts of the movie at the extreme left and right sides will not be visible (when playing a 16 : 9 size movie). Only DVD Video is played back if the disc contains DVD Video and Audio. DVD Audio is played back without Video. Setting the Video CD Play Mode When playing a Playback Control (PBC) enabled video CD, you can choose to set PBC ON or OFF. Setting item: PBC Setting contents: ON / OFF ON: OFF: The PBC menu is displayed. The PBC menu is not displayed. 16:9 WIDE: Select this when connected to a wide screen TV. This is the factory setting. 32-EN GENERAL Setup General Setup Operation To display the General mode screen: To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below. Displaying the Time The clock indication on the monitor display is turned on or off respectively. Setting item: CLOCK Setting content: OFF / ON Setting the Time Setting item: CLOCK ADJUST Further setting items : HOUR / MINUTE / TIME ADJUST Setting content: 1-12 / 0-59 / RESET HOUR: Adjust the hour. RESET: If the clock shows less than 30 minutes past, the minute will be "0"; more than 30, the hour advances. 1 Bring your vehicle to a complete stop at a safe location. 2 Keep pushing the foot brake and release the parking brake once then engage it again. 3 When the parking brake is engaged for the second time, release the foot brake. · For automatic transmission vehicles, place the transmission lever in the Park position. Now, the locking system for the General mode operation has been released. Engaging the parking brake can reactivate the General mode, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3), of "To display the General mode screen. " Each time the ignition is turned OFF, perform the procedure of "To display the General mode screen. " · The clock-adjusting mode is canceled when the power is turned off, when [RTN] is touched. Setting Daylight Saving Time Setting item: DAYLIGHT SAVING Setting content: OFF / ON Place the Summer Time mode ON. ON: The following steps 1 to 5 are common operations to each "Setting item" of GENERAL Setup. Refer to each section for details. Demonstration Function This unit is equipped with a demonstration function capable of showing basic operations of respective sources on the monitor display. Setting item: DEMONSTRATION Setting content: OFF / ON Turns on the demonstration mode to show the basic operations. ON: 1 2 3 4 Press SETUP. The SETUP selection screen is displayed. Touch [ ] of OTHER SETUP. The OTHER SETUP screen appears. Touch [ ] of GENERAL SETUP. The GENERAL setup screen appears. · The demonstration operation is automatically repeated until the function is turned off. Touch [ ] or [ ], etc. , of the desired item to change its setting. Sound (Beep) Guide Function Setting item: BEEP Setting content: OFF / ON ON: Activate the Sound Guide mode. The sound guide beep will not be produced when a button on the unit is pressed. Setting items: CLOCK / CLOCK ADJUST / DAYLIGHT SAVING / DEMONSTRATION / BEEP / AUTO SCROLL / ADF* / PLAY MODE / LANGUAGE SELECT / LED DIMMER LEVEL * Displayed only when XM Satellite Radio Receiver is connected. 5 Touch [RTN] to return to the previous screen. · A beep always sounds when opening or closing the monitor, regardless of this setting. · Immediately after changing the settings of General Mode (While the system is writing data automatically) do not turn the ignition key (engine key) to OFF. Otherwise, the settings may not be changed. 33-EN Setting the Scroll Scroll display is available if CD text, folder name, file name or tag information is entered. Setting item: AUTO SCROLL Setting content: OFF / ON Turns on the AUTO scroll mode. Scroll display is repeated as long as the mode is turned on. Scroll display is done once as a track is changed (only when the scroll display cannot appear entirely). ON: SYSTEM Setup System Setup Operation To display the System mode screen: To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. [. . . ] · Keep the DC/DC converter away from the Antenna cables and the rear side of the unit, otherwise noise may be generated when receiving radio broadcast. Ai-NET Connector Connect this to the output or input connector of another device (CD Changer, Equalizer, HD RadioTM TUNER MODULE, etc. ) equipped with Ai-NET. · Interface adapter (KCA-420i) is not recommended for use with this product. · You can input TV/video sound by connecting an optional Ai-NET/ RCA Interface cable (KCA-121B) to this component. Ai-NET Cable (Included with CD Changer) RGB Input Terminal Connect this to the RGB output terminal of the Navigation System. Video Input Connector (AUX INPUT) (Yellow) Input the video. Audio Input Connectors (AUX INPUT) RED is right and WHITE is left input the audio. iPod Direct Connector Control iPod signals. Connect this to an iPod, using the (sold separately) FULL SPEEDTM Connection Cable (KCE-422i). Video Output Connector (Yellow) Output the video. Subwoofer RCA Connectors Connect the input lead of an amplifier for the subwoofer to this terminal. FULL SPEEDTM Connection Cable (KCE-422i) (sold separately) System Switch When connecting a processor or divider using Ai-NET, place this switch in the EQ position. [. . . ]