User manual ALPINE IVA-D106R

[. . . ] FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE UNIQUEMENT/PARA USO EN AUTOMÓVILES/SOLO PER L'UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK/ALLEEN VOOR GEBRUIK IN DE AUTO/ /DO UYCIA TYLKO W SAMOCHODZIE/ R EN Mobile Media Station DE IVA-D106R FR ES DIGITAL VIDEO · OWNER'S MANUAL Please read before using this equipment. · BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. [. . . ] The sound guide beep will not be produced when a button on the unit is pressed. · The adjustment is available when ON or AUTO is set in "Setting the Brightness of the Backlighting" (page 40). · The adjusted brightness is reflected in the button lighting. · A beep always sounds when opening or closing the monitor, regardless of this setting. 36-EN SYSTEM Setup System Setup Operation The Parking Brake must be engaged to access the SYSTEM mode screen. Attempting to access this screen while driving will display the warning-CAN'T OPERATE WHILE DRIVING. Setting the External Device Interrupt Mode If an Alpine Ai-NET Interrupt Box (NVE-K200) is connected to the IVA-D106R, an Auxiliary Source will be allowed to interrupt the current audio source. For example, you can listen to the voice guidance of your navigation system when it occurs even while you are playing a CD or DVD. The CD/DVD player will be automatically muted during voice guidance. For further details, please refer to the manual for NVE-K200. Setting item: IN INT. MUTE Setting content: OFF / ON OFF: The volume level can be adjusted in Interrupt mode. ON: Sound will not be output. The following steps 1 to 4 are common operations to each "Setting item" of SYSTEM Setup. Refer to each section for details. 1 2 3 Touch [SETUP] on the main source screen. The SETUP selection screen is displayed. Touch [ ] of SYSTEM SETUP. · The auxiliary device being connected must have an Interrupt wire with a negative trigger for this function to operate automatically. Otherwise, a separate switch needs to be added to switch it manually. is set in "Setting the Bluetooth Connection (Bluetooth IN)" (page 39), the IN INT. MUTE setting item is not displayed. The SYSTEM setup screen appears. Setting the Interrupt Icon Display The unit can display the icon of an external device, such as a telephone, whenever a phone call comes in to tell you there is a phone call. Setting item: IN INT. ICON Setting content: INT / TEL INT: The INT icon appears on the display. TEL: When the external device (telephone) sends the interrupt signal, the telephone icon appears on the display. Touch [ ] or [ ] of the desired item to change its setting. Setting items: IN INT. MIX*2 / iPod / CAMERA IN / AUX IN / AUX IN LEVEL*3 / AUX OUT / BLUETOOTH IN / USB ADAPTER / VISUAL KEY / ILLUMI. COLOR / OPTICAL OUT / AUX+ LEVEL*4 *1 When ON is set in "Setting the Picture/Sound Output" (page 39), the item is displayed. *2 When ON is set in "Setting the Navigation Mode" (page 38), the item is displayed. *3 When ON is set in "Setting the AUX Mode" (page 38), these items are displayed. *4 When AUX+ is set in "Setting for iPod Connection" (page 38), the item is displayed. *5 When OFF is set in "Setting the Bluetooth Connection (Bluetooth IN)" (page 39), the item is displayed. Switching the function of the remote sensor For remote control operation, the remote sensor of the external device (monitor, etc. ) can be switched, as you prefer. Setting item: REMOTE SENSOR Setting contents: FRONT / REAR 4 Touch [RETURN] to return to the previous screen. · Immediately after changing the settings of System Mode (While the system is writing data automatically) do not turn the ignition key (engine key) to OFF. Otherwise, the settings may not be changed. FRONT: REAR: The remote sensor of this unit is effective. The remote sensor of the external monitor connected to AUX OUT of this unit becomes effective. [. . . ] Please observe the following when using Fiber optic Cable. · Do not coil the Fiber optic Cable smaller than a 30 mm radius. · Do not place anything on top of the Fiber optic Cable. · Be careful not to bend the Fiber optic Cable at a sharp angle. 77-EN System Switch When connecting an equalizer or divider using Ai-NET feature, place the two switches in the EQ/DIV position. [. . . ]