User manual ALPINE IVA-D310

[. . . ] R Mobile Multimedia Station EN IVA-D310 FR TM DIGITAL VIDEO ES · OWNER'S MANUAL Please read before using this equipment. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. ALPINE ELECTRONICS MARKETING, INC. 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-0031, Japan Phone 03-5496-8231 ALPINE ELECTRONICS OF AMERICA, INC. [. . . ] · Wallpapers downloaded from "Downloading the MY BACKGROUND data" (page 44) are recalled. · When you select a source other than the built-in disc on this unit, and the built-in disc is selected on the rear monitor connected to the unit, background textures cannot be displayed on the unit. · When an error message is displayed (ERROR, HI-TEMP, etc. ), background textures selected by this setting cannot be displayed on the unit. 1 Touch [ ] of SCREEN ALIGNMENT. 2 Accurately touch the mark provided in the lower left corner of the screen. The screen changes to the adjustment screen. 3 Accurately touch the mark provided in the upper right corner of the screen. This completes adjustment, and returns to the DISPLAY setup mode screen. · If you have touched a location other than the mark, touch [RESET] to restore the adjustment screen to the initial setting. · If you touch [RETURN] on the adjustment screen, no adjustment is done and the DISPLAY setup screen is restored. Setting Automatic Background Textures The background texture will automatically change each time the ignition key is turned off and turned back on again. Setting item: AUTO BACKGROUND Setting content: OFF / ON ON: Turn on the Auto Background Texture Scroll mode. The background textures will scroll when the ignition key is turned off once and turned back on again as follows: MODE1 MODE2 OFF: Turn off the Auto Background Texture Scroll mode. · Wallpapers downloaded from "Downloading the MY BACKGROUND data" (page 44) are recalled. Setting the Font Type You can choose a character (text and tag information, etc. ) font type for the main display. Setting item: FONT TYPE Setting content: FONT 1 / FONT 2 FONT1: Selects bold characters. FONT2: Selects round characters. Switching the Font Back Display Color You can choose from 5 different display colors for the font back (source title, shortcut display, etc. ). Setting item: BASE COLOR Setting contents: MODE 1 to MODE 5 36-EN (DVD MUSIC) i-PersonalizeTM Media Xpander Function Setting the MX mode To display the i-Personalize mode screen: To watch a video source, your vehicle must be parked with the ignition key in the ACC or ON position. To do this, follow the procedure below. This disk contains a large quantity of data such as a music clip. MX uses this data to reproduce the sound accurately. MX AUX 1 to 3 (OFF, CMPM MX, MOVIE MX, MUSIC MX) Choose the MX mode (CMPM, MUSIC, or MOVIE) that corresponds to the media connected. 6 Touch [RETURN] to return to the previous screen. 1 Bring your vehicle to a complete stop at a safe location. 2 Keep pushing the foot brake and release the parking brake once then engage it again. 3 When the parking brake is engaged for the second time, release the foot brake. · For automatic transmission vehicles, place the transmission lever in the Park position. Now, the locking system for the i-Personalize mode operation has been released. Engaging the parking brake can reactivate the iPersonalize mode, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3), of "To display the i-Personalize mode screen. " Each time the ignition is turned OFF, perform the procedure of "To display the i-Personalize mode screen. " · When OFF is selected, MX effect of each MX mode will be off. · Each music source, such as radio, CD and MP3 can have its own MX setting. · AUX is displayed when ON is selected in "Setting the AUX Mode" (page 34). · MX mode does not function for AM radio, NAV. · MX COMPRESS MEDIA is applied for MP3/WMA, MMD, iPod. [. . . ] · Be sure to turn the power off to the unit before changing the switch position. Fuse Holder (10A) Right Front (+) Speaker Output Lead (Gray) Right Front (­) Speaker Output Lead (Gray/Black) Right Rear (­) Speaker Output Lead (Violet/Black) Right Rear (+) Speaker Output Lead (Violet) Left Rear (+) Speaker Output Lead (Green) Left Rear (­) Speaker Output Lead (Green/Black) Left Front (­) Speaker Output Lead (White/Black) Left Front (+) Speaker Output Lead (White) Remote Control Interface Connector Connect to the remote control interface box. Antenna Receptacle AUX Input Terminals/AUX Output Terminals If these terminals are connected to the optional expansion box (VPE-S431), the AUX input and output terminals are not used on this unit. Connect AUX IN 1, 2 and 3, and the AUX OUT 1 and 2 terminals of the expansion box (VPE-S431) to the external device(s). 77-EN System Example Connect the Ai-NET compatible audio processor (Fiber digital compatible), Navigation system, DVD player and changer. IVA-D310 Monitor NVE-N852A/NVE-N871A Navigation system (Sold Separately) Fiber optic cable *Fiber digital Input terminal (for head unit) IVA-D310 Tuner BOX Audio Processor (Ai-NET) (Fiber Digital compatible) (Sold Separately) R SUBW. PRE IN/OUT REAR FRONT POWER SUPPLY L Ai-NET REMOTE IN / OUT EXT. OUT NAVIGATION IN DISPLAY OUT AV SELECTOR Ai-NET cable CAMERA IN AUX OUT Fiber digital Input terminal (for DVD Player) Ai-NET cable Fiber digital Input terminal (for Changer) VIDEO L AUDIO R AUX IN RADIO ANTENNA IN **Fiber optic cable EQ/DIV NORM Fiber optic cable (Yellow) (White/Brown) REMOTE OUT (White/Brown) REMOTE IN DVD Video Player (Ai-NET) (DVA-5210 etc. ) (Sold Separately) Ai-NET cable CD Changer (Ai-NET) (Sold Separately) **Only connect fiber digital compatible CD Changer · When the fiber digital compatible product is connected, it is necessary to set the mode of this unit. Refer to "Setting the Digital Output" (page 35) and set to ON. Then refer to "Optical Digital Input Selection for an External Audio Processor" (page 35) and switch the setting. [. . . ]