User manual ALPINE IVA-D310RB

[. . . ] FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE/PARA USO EN AUTOMÓVILES/SOLO PER L'UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK R Mobile Media Station EN IVA-D310R IVA-D310RB TM DE DIGITAL VIDEO FR · OWNER'S MANUAL Please read before using this equipment. · BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. [. . . ] Attempting to access this screen while driving will display the warning-CAN'T OPERATE WHILE DRIVING. · By shifting to reverse (R), the rear pictures are output. This function is effective when the reverse wire is properly connected. · To apply the setting, set to VISUAL "Setting the VISUAL Touch Button" (page 36). The following steps 1 to 5 are common operations to each "Setting item" of DISPLAY Setup. Refer to each section for details. Setting the VISUAL Touch Button Setting item: VISUAL KEY Setting content: VISUAL / NAV. NAV. : Switches directly to the navigation screen by touching [VISUAL]. (Only when an Alpine optional RGB Navigation is connected. ) VISUAL: Recalls the VISUAL Select screen by touching [VISUAL]. 1 2 3 4 Touch [SETUP] on the main source screen. The SETUP selection screen is displayed. Touch [OTHER SETUP]. The OTHER SETUP screen appears. Touch [ ] of DISPLAY SETUP. The DISPLAY setup screen appears. Touch [ ], [ ] or [OFF], [ON], etc. , of the desired item to change its setting. Changing the Lighting Colour of Buttons (IVA-D310R only) Setting item: ILLUMINATION COLOR Setting content: GREEN / RED GREEN: Lighting colour is green. RED: Lighting colour is red. Setting items: DIMMER / DIMMER LOW LEVEL / BACKGROUND / AUTO BACKGROUND / FONT TYPE / BASE COLOR / PULSETOUCH / SCREEN ALIGNMENT 5 Touch [RETURN] to return to the previous screen. Touch [CONTROL] to return to the main source screen that was displayed before the setup operation was started. Optical Digital Input Selection for an External Audio Processor Make sure "OPTICAL OUT" is ON in "Setting the Digital Output" (page 36) before switching this setting. Setting item: A. PROC TYPE Setting contents: PXA-H510 / OTHER When connecting any audio processor via an optical digital cable except the PXA-H510. Connect the optical digital input connector with the connector for the Head unit. Connect the optical digital input connector with the connector for the DVD. OTHER: · Immediately after changing the settings of Display Mode (While the system is writing data automatically) do not turn the ignition key (engine key) to OFF. Otherwise, the settings may not be changed. Setting the Brightness of the Backlighting Backlighting is provided by a fluorescent light built into the liquid crystal panel. The illumination control adjusts the brightness of the backlighting based on the car ambient lighting for easier viewing. Setting item: DIMMER Setting content: OFF / ON / AUTO Deactivate Auto Dimmer mode to keep the background illumination of the monitor bright. ON: Keep the background illumination of the monitor dark. AUTO: Adjust the brightness of the background illumination of the monitor automatically to the brightness of the car interior. OFF: · After input selection is completed, turn ignition OFF and back ON again. Your setting of the optical digital input switch is completed. Setting the Digital Output To connect an audio processor using the optical digital output, set to "ON" by the following procedure. Setting item: OPTICAL OUT Setting contents: OFF / ON · When ON or AUTO is set, the setting is also applied for the button lighting in "Adjusting the Dimmer of Button Lighting at Night" (page 33). · Afterwards, set ACC to OFF once, then turn it ON again. The setting of Digital Output is decided. 36-EN Adjusting the Minimum Level of Backlight You can adjust the brightness of the backlight (LOW). This function could be used, for instance, to change the screen brightness while travelling at night. Setting item: DIMMER LOW LEVEL Setting content: -15 to +15 Turning the Touch Panel Vibration ON or OFF You can turn the touch panel's vibration ON or OFF during operation. Setting item: PULSETOUCH Setting content: OFF / ON OFF: ON: Turns off vibration during operation. Turns on vibration during operation. You can adjust the level between MIN (-15) and MAX (+15). When it reaches the minimum or maximum point, the display shows "MIN" or "MAX" respectively. Adjusting the Touch Panel Adjustment becomes necessary when the display position on the LCD and the touch position on the touch panel do not match. Setting item: SCREEN ALIGNMENT Setting content: / RESET Switching Background Textures You have a choice of background textures you can set. Setting item: BACKGROUND Setting content: MODE1 / MODE2 · This operation can be carried out after removing the disc from the unit or when playback of the disc has stopped. · Wallpapers downloaded from "Downloading the MY BACKGROUND data" (page 45) are recalled. · When you select a source other than the built-in disc on this unit, and the built-in disc is selected on the rear monitor connected to the unit, background textures cannot be displayed on the unit. [. . . ] This is linked to putting the car into reverse (R). Remote IN/OUT Terminal CAMERA Input Terminal Use when connecting a back-up camera. AUX Video/Audio Output Terminal Use when connecting an optional monitor etc. RCA Extension Cable (Sold separately) AUX Video/Audio Input Terminal Monitor Control Lead (White/Pink) Connect this to the Monitor Control Lead of the touch panelcompatible rear monitor. 76-EN Connect an expansion box (VPE-S431), DVD Player, DVD Changer or the Touch Panel-compatible Monitor. IVA-D310R/IVA-D310RB Tuner BOX SUBW. PRE IN/OUT REAR FRONT POWER SUPPLY Ai-NET R L REMOTE IN / OUT EXT. OUT NAVIGATION IN To AUX Input (AUX IN 3) Terminals To AUX Input (AUX IN 1) Terminals DVD PLAYER (DVA-5210, etc. ) (Sold separately) DISPLAY OUT AV SELECTOR CAMERA IN AUX OUT VIDEO L AUDIO R AUX IN RADIO ANTENNA IN EXPANSION BOX (VPE-S431) (Sold separately) To AUX Output Terminals To AUX Input (AUX IN 2) Terminals DVD CHANGER (Sold separately) M. CONT (White/Pink) REMOTE IN (White/Brown) REMOTE OUT (White/Brown) REMOTE OUT (AUX2) REMOTE OUT (AUX1) (White/Brown) REMOTE IN (AUX1) (White/Brown) REMOTE IN (AUX2) (White/Brown) EQ/DIV NORM M. CONT To Video Input Terminals (White/Pink) To Audio Input Terminals TOUCH PANEL COMPATIBLE REAR MONITOR (Sold separately) · If the expansion box (VPE-S431) is connected to either a DVD video player or DVD changer, connect to AUX IN 1. If it is connected to AUX IN 2, remote control operation will not be possible. If both are to be connected, connect the DVD video player to AUX IN 1, and the DVD changer to AUX IN 2. System Switch When connecting an equalizer or divider using Ai-NET feature, place this switch in the EQ/DIV position. When no device is connected, leave the switch in the NORM position. [. . . ]