User manual ALPINE IVA-W200RI

[. . . ] FOR CAR USE ONLY/NUR FÜR AUTOMOBIL GEBRAUCH/POUR APPLICATION AUTOMOBILE/PARA USO EN AUTOMÓVILES/SOLO PER L'UTILIZZO IN AUTOMOBILE/ENDAST FÖR BILBRUK R Mobile Media Station EN IVA-W200Ri DE TM DIGITAL VIDEO · OWNER'S MANUAL Please read before using this equipment. · BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. [. . . ] · For automatic transmission vehicles, place the transmission lever in the Park position. Now, the locking system for the System mode operation has been released. Engaging the parking brake can reactivate the System mode, as long as the car's ignition has not been turned off. It is not necessary to repeat the above procedure (1 through 3) of "To display the System mode screen. " Each time the ignition is turned OFF, perform the procedure of "To display the System mode screen. " Playing MP3/WMA Data (Play Mode) This product can play back CDs containing both CD and MP3/WMA data. However, in some situations (some enhanced CDs), playback may be difficult. For these special cases, you can select playback of CD data only. When a disc contains both CD and the MP3/WMA data, playback starts from the CD data portion of the disc. Setting item: PLAY MODE Setting content: CD / CMPM CD: Only CD data can be played back. CMPM: Both CD data and MP3/WMA file tracks can be played back. The following steps 1 to 5 are common operations to each "Setting item" of SYSTEM Setup. Refer to each section for details. 1 2 3 4 Touch [SETUP] on the main source screen. The SETUP selection screen is displayed. Touch [OTHER SETUP]. The OTHER SETUP screen appears. Touch [ ] of SYSTEM SETUP. · Insert the disc when playback is stopped and remove the disc from the unit before setting. · When an MP3-compatible CD changer is used, this setting cannot be applied. The SYSTEM setup screen appears. Touch [ ], [ ] or [OFF], [ON], etc. , of the desired item to change its setting. Adjusting the Dimmer of Button Lighting at Night You can adjust the brightness of the button lighting at night with the dimmer. Setting item: LED DIMMER LEVEL Setting level: -2 to +2 Setting items: IN INT. MIX / AUX IN / AUX IN LEVEL*1 / CAMERA IN / MONITOR OUT / VISUAL KEY*3 / OPTICAL OUT / SUBWOOFER*2 *1 *2 *3 Not displayed when OFF is set in "Setting the AUX Mode" (page 34). Not displayed when an external audio processor is connected. Not displayed when OFF is set in "Setting the Navigation Mode" (page 34). · The adjustment is available when ON or AUTO is set in "Setting the Brightness of the Backlighting" (page 36). 5 Touch [RETURN] to return to the previous screen. Touch [CONTROL] to return to the main source screen that was displayed before the setup operation was started. · Immediately after changing the settings of System Mode (While the system is writing data automatically) do not turn the ignition key (engine key) to OFF. Otherwise, the settings may not be changed. 33-EN Setting the External Device Interrupt Mode If an Alpine Ai-NET Auxiliary Input Adapter (KCA-801B) is connected to the IVA-W200, an Auxiliary Source will be allowed to interrupt the current audio source. For example, you can listen to a portable MP3 player through your car audio system even with a CD changer connected and playing. The CD changer will automatically mute when switched to the AUX Input. For further details on how to use the Alpine KCA-801B, see your authorized Alpine dealer. Setting item: IN INT. MUTE Setting content: OFF / ON OFF: The volume level can be adjusted in Interrupt mode. The icon that is set in "Setting the Interrupt Icon Display" is displayed. Setting the Navigation Interruption With an Alpine navigation system connected to the IVA-W200, the voice guidance of the navigation system will be mixed with the radio or CD play. Setting item: NAV. MIX Setting content: OFF / ON OFF: The navigation interruption mode is turned off. ON: The navigation interruption mode is on. To adjust the navigation interruption volume level, the adjustment for NAV. LEVEL can be performed in "Adjusting the Audio" on page 24 after setting to ON. · The audio volume during navigation guidance is set by adjusting the audio volume during the navigation announcement. [. . . ] Refer to "Setting the Digital Output" (page 35) and set to ON. · When the NVA-N751AS is connected for the Navigation System, use the RGB conversion cable KWE-503N (Sold separately). Please observe the following when using Fiber Optic Cable. · Do not coil the Fiber Optic Cable smaller than a 30 mm radius. [. . . ]