User manual ALPINE NVE-N055-SPACE-SERIES-SPACE-CD-ROM-SPACE-SOFTWARE

[. . . ] R DIGITAL INFORMATION MAP/CARTE ROUTIERE SUR CD ROM R SMART MAP PRO OWNER'S MANUAL Please read before using this disc. ALPINE ELECTRONICS, INC. Tokyo office: 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-8501, Japan Tel. : (03) 3494-1101 ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U. S. A. Tel. : 1-800-ALPINE-1 (1-800-257-4631) 1-888-NAV-HELP (1-888-628-4357) ALPINE ELECTRONICS OF CANADA, INC. [. . . ] · To return to the previous screen, press the RETURN button twice. When this button is pressed only once, the point menu will not be displayed. 4 28 To return to the present vehicle position, press the POS. button. Searching from local points The system can display up to 6 points (max. ) of interest in a range of 6 miles (10 km) around the reticule icon such as hospitals, parking lots, petrol stations, restaurants, train stations, airports, hotels, tourist information offices, and ferries. You can search for the desired destination from these local points. 1 Display the POINT SET menu in a searching mode or pressing the LO. PT. button on the remote control (RUE-4113), and select "LOCAL POINTS" then press ENTER. ENTER Searching For Locations 2 The list for the selected local points is displayed. Select the desired local point and press ENTER. ENTER 3 The reticule icon appears at the selected local point, then the point menu appears. · For details on route searching, see page 42. · To return to the previous screen, press the RETURN button twice. When this button is pressed only once, the point menu will not be displayed. Displays the distance/ direction of the points from the present vehicle's position on the map in order of distance. 4 To return to the present vehicle position, press the POS. button. 29 Searching For Locations Auto searching for border point When you travel using two map CD ROMs, you can select automatically or manually a border point on the road as a waypoint or a destination so that the navigation system guides you to the border point. If your final destination is located in the covering area of the other CD ROM, you can select your destination via the border point as a waypoint. (For Manual Searching, see page 33. ) 1 Press the MENU button to display the main menu. Select "Route" from the main menu, the sub-menu appears. ENTER 2 Select "ROUTE PREF. " from the submenu and press ENTER. The "Select route preferences" menu appears. ENTER 3 Select "AUTO" from the "MUTI-CD" menu and press ENTER. ENTER Notes: · To select the Auto Searching for a border point, the present vehicle position and destination should be included in 2 different map areas which are adjoining each other, and the CD ROM including the destination area should be loaded. When "MANUAL" is selected, see the Manual searching for border point section on page 33. · If you have only one map CD ROM or you use the map CD ROM for Great Britain or you travel on a direct ferry boat from the area of the current vehicle position to an adjacent area or vice versa, select "OFF. " 30 4 When you search for a destination for the first time, replace the CD ROM with the one for the adjacent area in which the desired destination is located. When the destination has already been memorized, it is not necessary to replace the CD ROM. Search for the desired destination by selecting "Search" in the main menu. (The example shows when a hotel is selected as the desired destination. ) The navigation system will check the present position of your vehicle and the map disc loaded in the system whether these match with the conditions shown in the note of Step 3. If they match, the system automatically displays the border point. ENTER Searching For Locations 5 If the border point displayed is correct, select "WAYPOINT. " The system calculates the route to the destination via the waypoint (border point). ENTER Note: If you wish to select some other border point, select "BORDER POINT" and go to Step 3 of the manual border point searching procedure on page 33. 31 Searching For Locations 6 The WAYPOINT sub-menu appears automatically. Select the desired menu and press ENTER. Note: Since the border point will be set as a waypoint, if all the waypoints have already been set, although the system can guide you to the border point, you need to replace the border point with one of the waypoints if you wish to set the border point as a waypoint. 7 Press the POS. button. The route search screen is displayed. POS. 8 When the destination is selected in Step 4 with the CD ROM for the other area loaded, replace the CD ROM at the starting point with the one that covers the area of the present vehicle position. The navigation system will guide you from the starting point to the destination. (If the CD ROM covering the area of the present vehicle position is not loaded, the navigation system will not guide you from the starting point to the border point. ) When the destination is selected in Step 4 with the CD ROM for the area of the present vehicle position loaded, replace the CD ROM at the border point to have the navigation system guide you to the destination. 9 32 Press the ROUTE button. The navigation system starts to search for the route. When the route search is completed, the current location is displayed. When you start driving, the guidance begins. Manual searching for border point You can search for a route to the border point within the area that includes the current vehicle position and crossing point to the desired area. 1 Press the MENU button to display the main menu. [. . . ] · When the ROUTE button was pressed during a route search to switch between motorway selection/ordinary road selection for route searching, for some reason, no route could be found. · An attempt was made to erase a waypoint even though no waypoint is set. Solution Insert the disc (sold separately). CD ROM unreadable. Please check CD ROM. Insert the map disc (sold separately). [. . . ]