User manual ALPINE NVE-N077P-PS-SPACE-SOFTWARE

[. . . ] Tokyo office: 1-1-8 Nishi Gotanda, Shinagawa-ku, Tokyo 141-8501, Japan Tel. : (03) 3494-1101 ALPINE ELECTRONICS OF AMERICA, INC. 19145 Gramercy Place, Torrance, California 90501, U. S. A. Tel. : 1-800-ALPINE-1 (1-800-257-4631) 1-888-NAV-HELP (1-888-628-4357) ALPINE ELECTRONICS OF CANADA, INC. Markham, Ontario L3R 9Z6, Canada Tel. : 1-800-ALPINE-1 (1-800-257-4631) 1-888-NAV-HELP (1-888-628-4357) ALPINE ELECTRONICS OF AUSTRALIA PTY. [. . . ] Select "Search" from the main menu, the "Locate telephone No. on map" menu appears in the display automatically. Select "TELEPHONE No. " and press ENTER. The numeric pallet is displayed. 6 The "Point may be set on map" menu with the map showing the area of the point of interest appears. Select the desired menu item and press ENTER to set the point as a destination, waypoint, etc. Searching For Locations Tips If no telephone number has been stored yet, the display shows "Telephone No. is not available. " 3 Enter the telephone number of the point following Steps 3 to 4 of the "Searching for destination from telephone number" section (page 21). 25 Searching For Locations Moving the map to search for locations The map can be freely moved with the joystick in 8 directions. The best way to find a location is first to display the wide range map and specify the approx. You can find the desired location efficiently by specifying more and more detailed maps. When the point menu appears, you can search for your route with one touch. (See page 35. ) Searching for locations by latitude/longitude input If you know the latitude and longitude of the desired location, you can display that location by just inputting those numbers. 1 1 With the map screen displayed, tilt the remote control joystick in any of the eight directions. Press the MENU button to display the main menu. Select "Search" from the main menu, then select LAT/LONG. INPUT from the submenu and press ENTER. 2 The map moves in the direction in which the joystick is tilted. 2 The latitude/longitude pallet appears. Tilt the joystick to select number for the latitude and longitude and press ENTER. When you have completed inputtings, select "END" and press ENTER. (Joystick tilted right) Column move There are two movement speeds, depending on how long the joystick is tilted. · To search for the route, move the map to bring the destination point on the map under the reticule icon, then press the ENTER button. (See page 35. ) · To return to the previous screen, press the RETURN button twice. 3 The position for the input latitude and longitude comes under the reticule icon and the point menu appears. · For details on route searching, see page 35. · To return to the previous screen, press the RETURN button twice. When this button is pressed only once, the point menu will not be displayed. 3 To return to the present vehicle position, press the POS. button. The map cannot be moved during menu screen display. button to display the map screen, then move the map. Tips 26 4 To return to the present vehicle position, press the POS. button. Searching from home/departure point/waypoint/previous destination If home/departure point/waypoint/previous destination have already been registered, you can call them out with a simple operation. For details on the registration method, see page 29. [. . . ] · An attempt was made to register more than 99 points in memory. · When the destination or waypoint was specified, there was no road in the area, so no route could be found. · No route could be found, for example due to traffic situations. · When the ROUTE button was pressed during a route search to switch between motorway selection/ordinary road selection for route searching, for some reason, no route could be found. [. . . ]