User manual ALPINE PXA-H700

[. . . ] R EN PXA-H700 MULTIMEDIA MANAGERTM · OWNER'S MANUAL Please read before using this equipment. · BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. [. . . ] · The source (media), such as radio, CD, and MP3 can be set. · "MX OFF" can be set in step 2. FR BASS COMP. setting The sound of the low frequencies can be adjusted to suit your tastes. ES 1 2 3 4 Check that the defeat mode is off. button to set the "BASS COMP. " setting mode. button for at least 2 seconds to turn the BASS COMP. Turn the Rotary encoder to select the desired mode, then press the ENTER button. As the bass level increases in order of BASS COMP. 3, you can enjoy listening to the powerful sound. Once the settings are completed, press the B. C. OFF" can be set in step 3. DE IT 5 SE 19-EN Using Dolby Surround ENTER Rotary encoder PLII/ REAR FILL DISP Using the Pro Logic II mode With the PXA-H700, Pro Logic processing can be conducted on the music signals recorded on two channels to achieve Dolby Pro Logic II surround sound. For two-channel Dolby Digital and DTS signals, there is also a "REAR FILL" function for outputting the signals of the front channel to the rear channel. * If DOLBY PL II MUSIC is selected, the center width can be adjusted with following operations. This function offers the optimum vocal position by adjusting the center channel position between the center speaker and the L/R speaker. (The adjustments established in "Adjusting the acoustic image" (page 24) are ineffective while this function is activated. ) 1) After selecting DOLBY PL II MUSIC, within PLII/ 15 seconds, press and hold the REAR FILL button for at least 2 seconds. 2) Turn the Rotary encoder to select "Center Width ON" or "Center Width OFF", then press the ENTER button. When the setting is turned ON, the optimum vocal position is offered by adjusting the center channel position between the center speaker and the L/R speaker. 3) Turn the Rotary encoder to adjust the level, then press the ENTER button. The level can be adjusted between 0 to 7. When the level increases, the center channel position moves from the center speaker position to both side. 4) After the setting, press and hold the PLII/REAR FILL button for at least 2 seconds. NOTES · Avoid stopping, pausing, switching the disc, cueing, fast-forwarding or switching the audio channel of the player while making this adjustment. The setting is canceled if the decode mode is switched. · This adjustment is ineffective if the center speaker is set to "OFF" or "Sub. W" in the speaker setup settings. 1 Press the PLII/REAR FILL button and select the desired mode. The setting mode is canceled if no operation is performed within 15 seconds after the mode is selected. DOLBY PL II MOVIE OFF DOLBY PL II MUSIC REAR FILL 2 Once the settings are completed, press the DISP button. NOTES · This function only works with two-channel signals. [. . . ] · Speaker is set to the off mode. (Pages 4 and 22) Speaker setup settings cannot be made. · Front speakers are set to "SMALL". - Set the front speakers to "LARGE". [. . . ]