User manual ALPINE RUE-4191

[. . . ] Remove the remote control from the holder and put it in the glove compartment. ⷠIf double-sided adhesive tape cannot install the holder securely, use screws. Remote Control Double-Sided Adhesive Tape (Before attaching the tape, make sure the mounting locations are free from dust or dirt) Protective Paper Console Box etc. [. . . ] Swallowing them may result in serious injury. Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Insert new ones matching the (+) and (­) polarities as shown in the diagram inside the remote control. Push the cover in the arrow direction until a click is heard. Depending on the unit, some operations cannot be performed. After pressing the MODE button, press the following buttons while the status indicator is blinking: Numeric Keypad (0 to 9). @ [ \ ] Remote Control Transmitter -- Status indicator for EXT DVD mode -- DVD Changer mode: Disc Selection Audio SOURCE button (When connected with the Ai-NET Head Unit) L (STOP) button VOLUME UP/DOWN (When connected with the Ai-NET Head Unit) MUTE button (When connected with the Ai-NET Head Unit) MENU button Press and hold for 2 seconds to display the setup menu. (Subtitle) button Press and hold this for 2 seconds to turn the subtitles ON and OFF. Button (When connected with the Digital Audio Processor) Playback, Press and hold for 2 seconds to playback the slow motion. Power ON/OFF button Chapters and tracks skip Press and hold for 2 seconds to BW/FF. This symbol means important instructions. Failure to heed them can result in injury or material property damage. When inserting the batteries, be sure to observe proper polarity (+ and ­) as instructed. [. . . ] Note: Depending on the unit, some operations cannot be performed. Note: Depending on the unit, some operations cannot be performed. Note: Depending on the unit, some operations cannot be performed. [. . . ]