User manual ALPINE SBS-0515

[. . . ] If the unit is not installed correctly the air bag may not function correctly and when triggered the air bag may cause the speaker to spring upwards causing an accident and injuries. Check with your dealer if you are not sure. Doing so may obstruct forward vision or hamper movement. [. . . ] Use of other than designated parts may damage this unit internally or may not securely install the unit in place as parts that come loose may create hazards. A high incidence of moisture or dust that penetrates into this unit may cause smoke or fire. Blocking them may cause head to build up inside and may result in fire. Doing so may lead to accident, fire or electric shock. 25kg Specifications and appearance of the product may change without prior notice. Doing so may exceed the current carrying capacity of the wire and result in fire or electric shock. With this method used, speaker angle can be adjusted. 1 Assemble the speaker unit 1 and spacer 2 by using the screw (M4x8) 4. 2 Assemble the spacer 2 and plate 3 by using the screw (ø3x5) 5. 3 Peel off the back paper of the plate 3 and put the plate on the dashboard. 4 Fix with screw (ø5x16) 6 and speed nut 7. 1 Assemble the speaker unit 1 and plate 3 by using the screw (ø3x5) 5. 2 Peel off the back paper of the plate 3 and put the plate on the dashboard. 3 Fix with the screw (ø5x16) 6 and speed nut 7. Determine the mounting position at near center of the vehicle but free from disturbance of the driving. Mount the unit in a horizontal location as could as possible. [. . . ] Clean the mounting surface with cleaner 9, and put on the plate after the surface is dried completely. (Water component of the cleaner 9 will lower effect of both sided adhesive tape. ) Warm the mounting surface with a hair dryer, etc. [. . . ]