User manual ALPINE TDA-7570R

[. . . ] OWNER'S MANUAL Please read this manual to maximize your enjoyment of the outstanding performance and feature capabilities of the equipment, then retain the manual for future reference. The exclamation point within an equilateral triangle and "WARNING" are intended to alert the user to the presence of important operating instructions. Doing so may lead to accident, fire or electric shock. When problems occur such as a lack of sound or video, foreign objects inside the unit, smoke coming out, or noxious odors, stop use immediately and contact the dealer where you bought the equipment. [. . . ] If the signal level of the Regional (Local) station being tuned becomes too weak to receive, press the same preset location button to tune in a Regional station in other district. Press and hold the INTLZ button for at least 3 seconds to activate the setting mode. Press the TUNE button to turn on or off the REG (Regional) mode. In the REG OFF mode, the unit automatically keeps receiving the related local RDS station. When a traffic information station is tuned in, the TP indicator lights up. Traffic information is heard only when it is being broadcast. If traffic information is not being broadcast, the unit is set in the standby mode. When a traffic information broadcast begins, the unit automatically receives it and the display shows "TRF-INFO" for 5 seconds, then returns to the previous display. When traffic information broadcast is over, the unit will automatically set in the standby mode. If the traffic information broadinformación sobre el tráfico des informations routières cast signal falls below a certain desciende por debajo de cierto tombe sous un certain level, the unit remains in the nivel, la unidad permanecerá en el niveau, l'appareil reste en receiving mode for 1 minute. If you do not want to listen to the "T. If the volume level is changed información sobre el tráfico. Si cambia el volumen cuando esté while receiving traffic informapour la réception des recibiendo información sobre el prochaines informations tion, the changed volume level tráfico, la unidad memorizará el routières. Si vous changez le niveau du information is received next time, próxima vez que reciba volume pendant la réception the volume level will be autoinformación sobre el tráfico, la d'informations routières, ce matically adjusted to the level recibirá automáticamente al nivel niveau sera mémorisé et la memorized. The Programme Type of the station being currently received will be displayed for 5 seconds. If no RDS station can be received, the display shows "NO PTY. " Note: If no button is pressed within 5 seconds after pressing the F1 button, the PTY mode will be automatically cancelled. Press the DN g and f UP buttons within 5 seconds after activating the PTY mode to choose the desired programme type while the PTY (programme type) is being displayed. Press the F1 button (PTY) within 5 seconds after selecting the programme type to start searching for a station in the selected programme type. The chosen programme type indicator blinks during searching and lights when a station is found. When a traffic information broadcast starts, the unit automatically mutes the tape player or the regular FM broadcast. When the traffic information broadcast finishes, the unit automatically returns to the original source play before the traffic information broadcast began. [. . . ] 9 f Button Radio mode: SEEK (UP) Button Tape mode: FF Button CD/CD Shuttle mode: Press the button to advance to the beginning of the next track. 9 Button Radio mode: Pressing the button will select, in descending order, stations programmed into the radio's presets as shown below. This allows for music selection towards the beginning of the tape. This button is used in conjunction with an optional AiNET processor. [. . . ]