User manual ALPINE TDA-7588RB

[. . . ] R CDA-7876RB CDA-7873R FM/MW/LW/RDS CD Receiver EN DE TDA-7588RB TDA-7587R FM/MW/LW/RDS Cassette Receiver · OWNER'S MANUAL Please read before using this equipment. · BEDIENUNGSANLEITUNG Lesen Sie diese Bedienungsanleitung bitte vor Gebrauch des Gerätes. · MODE D'EMPLOI Veuillez lire avant d'utiliser cet appareil. · MANUAL DE OPERACIÓN Léalo antes de utilizar este equipo. [. . . ] This feature is functional when your unit is set to a mode other than the LW and MW. 1 2 Press the T. INFO button repeatedly until the T. INFO indicator appears in the display. Press the g DN and f UP buttons to select a traffic information station if necessary. · When a traffic information broadcast starts, the unit automatically mutes the CD player or the regular FM broadcast. · When the traffic information broadcast finishes, the unit automatically returns to the original source play before the traffic information broadcast began. · When traffic information stations cannot be received: In the tuner mode: When the TP signal can no longer be received for over 1 minute, the "T. INFO" indicator blinks. In the CD mode: When the TP signal can no longer be received, the traffic information station of another frequency will be selected automatically. NOTE The receiver is equipped with the EON (Enhanced Other Networks) function in order to keep track of additional alternative frequencies to the AF list. The EON indicator appears while an RDS EON station is being received. If the station being received does not broadcast the traffic information, the receiver automatically tunes in the related station that broadcasts the traffic information when it occurs. 1 2 Press the "F" button. The illuminate. indicator will Press the P. PTY button to activate the PRIORITY PTY mode. "PRIO-PTY" is displayed for 2 seconds and then the programme type for 3 seconds. The initial setting is "NEWS. " NOTE If no button is pressed within 5 seconds after pressing the P. PTY button, the PRIORITY PTY mode is automatically cancelled. 3 Press the g DN or f UP button within 5 seconds while "NEWS" is being displayed to choose a desired programme type. The PRIORITY PTY function will activate. 3 Press the T. INFO button to deactivate the Traffic Information mode. The T. INFO indicator disappears. 20-EN RDS 4 Press the P. PTY button to activate the PRIORITY PTY mode again. · To change the programme category, perform the step 3. · To disable the PRIORITY PTY function, press the P. PTY button. NOTE In the PRIORITY PTY function, unlike in the T. INFO function, the volume does not increase during operation. Displaying Radio Text Text messages from a radio station can be displayed. 1 2 3 4 5 Tune in a radio station that transmits text messages. indicator 5 Press the "F" button to activate the normal mode. The NOTE Operate the unit while the indicator is illuminated. If no buttons are pressed within 5 seconds, the indicator will turn off. Press the R. TEXT button to activate the Radio Text mode. [. . . ] This will enable the vehicle's dimmer control to dim the backlighting of the unit. 5 Switched Power Lead (Ignition) (Red) Connect this lead to an open terminal on the vehicle's fuse box or another unused power source which provides (+) 12V only when the ignition is turned on or in the accessory position. 6 Power Antenna Lead (Blue) Connect this lead to the +B terminal of your power antenna, if applicable. NOTE This lead should be used only for controlling the vehicle's power antenna. Do not use this lead to turn on an amplifier or a signal processor, etc. # System Switch When connecting a processor using Ai-NET, place this switch in the EQ/DIV position. [. . . ]