User manual ALPINE TME-M760

[. . . ] Using such parts could disable control of the vehicle and cause fire etc. dO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE. Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. [. . . ] Each press of the button will cycle through the modes as follows: WIDE ZOOM CINEMA NORMAL WIDE: ZOOM: Normal images are expanded uniformly in the horizontal direction and are displayed over the entire screen. Normal images are expanded in the horizontal direction and are displayed over the entire screen. The expansion ratio increases towards the right and left edges of the screen. cINEMA: Normal images are expanded in the horizontal and vertical directions. The top and bottom of the image is cut off. This mode is suited for 16:9 cinema size images. Illumination sensor/ Capteur d'illumination/ Sensor de iluminación Main power lamp/ Lampe d'alimentation principale/ Lámpara de alimentación principal PWR UP DN SELECT DISP Remote control sensor (The remote control is sold separately)/ Capteur de télécommande (La télécommande est vendue séparément)/ Sensor de mando a distancia (El mando a distancia se vende separadamente) 3 Controllable with Remote Control This unit can be controlled with an optional Alpine remote control. Commandable à distance Cet appareil peut être commandé à distance à l'aide d'une télécommande Alpine en option. (Only when navigation unit is connected. * Note that sound will not be output unless the audio output settings are appropriate. After completing adjustments, press and hold the SELECT button for at least 1 second. After turning the system off, a slight ghost of the image will remain temporarily. Under cold temperature conditions, the screen may lose contrast temporarily. After a short warm-up period, it will return to normal. This means that there is a possibility that 0. 01% of the pixels could be either always ON or OFF. If you encounter a problem, please review the items in the following check list. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected or consult your authorized Alpine dealer. Brightness/Color/Tint control are not set to the proper positions. Caused by neon signs, high-voltage power lines, CB transmitter, other vehicle's ignition plugs, etc. Navigation system's power is turned off. [. . . ] Connect to the positive lead of the back-up lamp which flashes when the shift lever is put in Reverse (R). 7 ACC power lead (Red) To ACC power lead powered when engine key position is ACC. 8 Fuse (5A) 9 Ground lead (Black) Connect the lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided. [. . . ]