User manual ALTEC LANSING 1236 SPEAKER SYSTEM

[. . . ] If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet. Protect the power cord from being walked on or pinched ­ particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Do not install in an area which impedes the access to the power plug. Disconnecting the power plug is the only way to completely remove power to the product and must be readily accessible at all times. [. . . ] The term of any warranties implied by law shall expire when your limited warranty expires. Some states and/or Member States in the European Union do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. What Does The Warranty Not Cover?: This warranty does not cover any defect, malfunction or failure that occurs as a result of: improper installation; misuse or failure to follow the product directions; abuse; or use with improper, unintended or faulty equipment. (For information on proper installation, operation and use consult the manual supplied with the product. If you require a replacement manual, you may download a manual from www. alteclansing. com. ) Also, consequential and incidental damages are not recoverable under this warranty. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. What Will Altec Lansing Do To Correct The Problem?: Altec Lansing will, at its option, repair or replace any product that proves to be defective in material or workmanship. If your product is no longer being manufactured, or is out of stock, at its option, Altec Lansing may replace your product with a similar or better Altec Lansing product. How To Get Warranty Service: To get a covered product repaired or replaced, you must contact Altec Lansing during the warranty period by email (csupport@alteclansing. com). You must include in your email, your name, address, email address, telephone number, date of purchase and a complete description of the problem you are experiencing. In the United States, you may alternatively contact Altec Lansing by telephone at 1-800-ALTEC88 -- please be prepared to provide the same information. Note: Alternate audio sources ­ such as nondockable iPod models, CD players, MP3 players, portable DVD players, and laptops ­ can also be connected to the inMotion iM310. For more information, see the "Connecting to alternate audio source" section. English Box Contents · inMotion iM310 portable speaker system · Docking adapters for iPod models · Power supply · User's guide and quick connect instructions Power Use one of the following two options to power your inMotion iM310: AC (Wall outlet) Power Insert the barrel connector from the power supply into the DC connector on the rear of the inMotion iM310. After this connection is made, insert the power supply into a wall outlet. DC (Battery) Power Install three AA batteries (not included) into the battery compartment on the bottom of the inMotion iM310. Make sure the batteries are installed as illustrated in the battery compartment. Made for: · iPod touch · iPod nano (3rd generation) · iPod classic · iPod nano (2nd generation) · iPod with video · iPod nano (1st generation) · iPod with color display · iPod with dock connector · iPod mini Start Playing 1. Turn on the inMotion iM310 by pushing the power button located on the left side of the top of the inMotion iM310. Note: To avoid hearing a popping sound when you turn on your inMotion iM310, turn your iPod on first. Placing the inMotion iM310 Open the inMotion iM310 by pressing the button on the front of the speaker system. Position the inMotion iM310 on a level surface, preferably close to you (within three feet). 3 Power Off Turn off the inMotion iM310 by pushing the power button located on the left side of the top of the inMotion iM310. The indicator light shuts off. Auto Shut-down (Standby) The inMotion iM310 automatically shuts down if no audio is detected for three minutes. NOTE: The Auto Shut-down (Standby) feature is active during battery-only operation. If the AC wall adapter is used, the inMotion iM310 will remain on as long as the power switch is in the "On" position. Connecting to alternate audio source The inMotion iM310 system includes an input jack that allows you to connect to alternate audio sources, such as non-dockable iPod models, CD players, MP3 players, portable DVD players, and laptops. [. . . ] See proper DC Power instructions in the "Power" section of this manual. The power may not be turned on. See instructions in the "Start Playing" section of this manual. To increase the volume, see instructions in the "Volume" section of this manual. If using an alternate audio source, see instructions regarding volume level in the "Connecting to alternate audio source" section of this manual. [. . . ]