User manual ALTEC LANSING 311-90 HF HORN

[. . . ] Heed Warning -- All warnings on the appliance and in the operating instructions should be adhered to. Follow Instructions -- All operating and use instructions should be followed. Water and Moisture -- The appliance should not be used near water ­ for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc. Outdoor Use -- Warning: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. [. . . ] Under the terms of this warranty, the original consumer purchaser has certain legal rights and may have other rights, which vary worldwide. 1 311-90 HF HORN WELCOME Video Gaming & TV Audio Subwoofer 2. Plug the remaining set of red and white RCA connectors on the supplied cable in the red (right) and white (left) inputs on your 311-90 HF HORN subwoofer. System Specifications Total System Power: 30 Watts (15 Watts RMS) 35 Hz - 150 Hz 150 Hz < 0. 2 % @ -10dB fullscale input voltage POWER REQUIREMENTS USA/Canada/and applicable Latin American countries: Europe/United Kingdom; applicable Asian countries; Argentina, Chile and Uruguay: ETL / cETL / CE / NOM / IRAM Approved 230 V AC @ 50 Hz 120 V AC @ 60 Hz Alternative Connection Method Welcome to the extraordinary world of Altec Lansing high-fidelity sound. The Altec Lansing 311-90 HF HORN system features a specially designed subwoofer to enhance TV audio performance. With 30 watts of total power, it adds deep, rumbling bass to your existing TV speakers for an improved video gaming and home theater experience. The Alternative Connection Method is designed for televisions that DO NOT have RCA audio outputs. This method connects the 311-90 HF HORN subwoofer between your audio source (video gaming system, DVD player or VCR) and your TV. When using the alternative connection method, your TV's volume control will not affect the 311-90 HF HORN subwoofer's volume level. The two systems work independent of one another. To ensure first-time operation as expected, please carefully follow the connection sequence described below. Using the RCA cable that is attached to the outputs on your video gaming system, DVD player or other audio source, plug the yellow, red and white RCA connectors into the yellow, red (right) and white (left) RCA inputs on the 311-90 HF HORN subwoofer. The yellow connector carries the video signal. Turn on the Altec Lansing 311-90 HF HORN subwoofer by pushing the power button located on the side of the subwoofer. A green LED next to the power button will illuminate. Note: To avoid hearing a popping sound when you turn on your Altec Lansing subwoofer, always turn on your audio source first. Making Connections WARNING: Do not insert the subwoofer's power adapter plug into an AC outlet until all connections are made. Also, turn off your audio source (TV, video gaming system, DVD player or VCR) before connecting its outputs to the 311-90 HF HORN's inputs. The 311-90 HF HORN subwoofer works with most televisions. To ensure your success in connecting the system to your TV, we created two proven methods. To choose which method is appropriate for your TV, first determine if you have RCA audio outputs on your television. If so, use the Recommended Connection Method below. If your TV does not have RCA audio outputs, use the Alternative Connection Method. Controls POWER A power button is located on the side of the 311-90 HF HORN. Switch the power button on only after all connections have been made. A green LED next to the power button will illuminate to indicate that power is on. [. . . ] Audio cable isn't connected to audio source. Connect audio cable from the audio source. Check plug connections on both the subwoofer and source. Make sure these signal cables are inserted firmly into the correct jacks. [. . . ]