Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ALTEC LANSING 515-8HHP LF SPEAKER. We hope that this ALTEC LANSING 515-8HHP LF SPEAKER user guide will be useful to you.
Lastmanuals help download the user guide ALTEC LANSING 515-8HHP LF SPEAKER.
Manual abstract: user guide ALTEC LANSING 515-8HHP LF SPEAKER
Detailed instructions for use are in the User's Guide.
[. . . ] (381 mm) Cut-Out Diameter Front Mount: 14. 125 in. (359 mm) Rear Mount: 14. 00 in (356 mm) WEIGHT Net: 30. 0 lbs. [. . . ] Their power handling capability shall be 200 watts AES (800 W peak). Their nominal impedance shall be 8 Ohms and 16 Ohms, with a minimum impedance of 7. 9 Ohms and 15. 8 Ohms at 600 Hz. The magnetic gap of these drivers shall have a flux density of 1. 5 T, resulting from an 8. 25 lbs. Their nominal free-air cone resonance shall be 37 Hz and their voice-coil shall be 3 inches (76 mm) in diameter of edge-wound aluminum ribbon. The loudspeakers shall have dimensions of 16 inches (406 mm) in diameter and 6. 69 inches (170 mm) in depth, and shall weigh 30 lbs. The low frequency loudspeakers shall be Altec Lansing models 515-8HHP and 515-16HHP.
FREQUENCY RESPONSE AND IMPEDANCE MAGNITUDE OF 515-16HHP IN 828G
As we are continually striving to improve Altec Lansing products, specifications are subject to change without notice. Please visit www. altecpro. com for the latest information on Altec Lansing Professional products.
SPECIFICATION NOTES
1 The frequency response of the loudspeaker system is measured at a distance of no less than 3 meters to obtain full range data. The level is then corrected to be equivalent to a 2. 83 V 1 m measurement. A near field measurement of the loudspeaker system is performed for frequencies below 500 Hz. This data is then combined with the full range measurement to give an accurate composite frequency response curve. [. . . ] The distortion percentages are log based averages from 300 Hz 3 kHz.
VISIT WWW. ALTECPRO. COM FOR
· Authorized EASE data on all Altec Lansing Professional loudspeakers · Specification sheets in . pdf format. Download page 1 of the specification sheet for you submittals. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ALTEC LANSING 515-8HHP LF SPEAKER
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ALTEC LANSING 515-8HHP LF SPEAKER will begin.
