User manual ALTEC LANSING 604-8K DUPLEX SPEAKER

[. . . ] 3 Location of Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Basic Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 OSD (On-Screen Display) Language Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Presetting Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] One-digit and two-digit methods of selection can be used. Follow the procedure shown below to select channels. 1 4 7 2 5 8 0 3 6 9 CH CH To select a one-digit channel (e. g. , Channel 5): (1) Press the 5 button. (2) If "5-" is indicated and the picture does not change, press the button to switch over to the 1-digit select mode and press the 5 button again. PAL B/G 5 1 4 7 2 5 8 3 6 9 0 CH CH To select a two-digit channel (e. g. , Channel 15): (1) Press the button to set the 2-digit select mode. (3) Press the 5 button. · In this mode entering a 0 first will enable selection of single digit channels e. g. · Complete this procedure within 6 seconds, otherwise the selection will not be made. -115 PAL B/G (3) Adjusting the Volume CH CH Press the VOLUME UP ( ) or DOWN ( ) button to adjust the volume. The number of oval blocks " indicates volume level. " (TV set) The display disappears approximately 3 seconds after the volume adjustment has been completed. VOLUME 7 OSD (On-Screen Display) Language Selection On-Screen Display language selection 1 4 7 2 5 8 0 3 6 9 !Press the FUNCTION button 5 times. @ Press the CHANNEL UP (CH) or DOWN (CH) button to move the : mark on the screen when selecting "ENGLISH", "CHINESE", "FRENCH", "MALAY" or "ARABIC". ENGLISH FRANCAIS BAHASA MELAYU CH CH @ !, # FUNCTION SYSTEM TIMER NORMAL PICTURE # Press the FUNCTION button again. The on-screen display disappears. · If approximately 6 seconds pass without a button being pressed, the mode setting is automatically terminated and the TV set returns to normal mode. Presetting Channels Full Auto Channel Preset (AUTO): Automatically tunes in and presets receivable TV stations. (TV set) !Press the PICTURE (PRESET- 1 ) button on the TV set for more than 2 seconds, to turn on Full Auto Channel Preset Mode. Sound System AUTO(B/G) VHF 1 48. 25MHz ! @ @ Press the VOLUME UP ( ) ) button on the or DOWN ( TV set. All the TV stations in your area that can be received by the TV set are automatically preset between channels 1 to 99. finished, the screen shows whatever is on channel 1. · Unused channels are automatically skipped. # When full auto channel preset is PAL B/G 1 8 ENGLISH Presetting Channels (continued) Manual Channel Preset (MANUAL): Setting a channel to a desired TV station. (TV set) !The on-screen display disappears. H Action of the Reminder 5 minutes before the preset length of time has passed, the remaining time is displayed on the screen for 10 seconds. When the preset length of time (in the above example 3 hours and 30 minutes) has passed, the " " mark turns red. The Reminder function also works when the TV set is in Standby mode. Power is automatically turned on 5 minutes before the preset length of time has passed. After completion of above steps, the TV set returns to Standby mode automatically. (If you press any key before the TV set returns to Standby mode, the TV set remains on and does not return to Standby mode. ) (Example) Flashing Turns red for 1 minute. Flashing · · · · To cancel the Reminder, press the NORMAL button during the Reminder mode. The minute setting of the timer is in 10-minute units. The Reminder is cancelled if the Ï POWER switch on the TV set is turned off or if the power is otherwise cut off. If approximately 6 seconds pass without a button being pressed, the mode setting is automatically terminated and the TV set returns to normal mode. 13 Timers (continued) OFF Timer: Automatically turns to Standby mode after the set length of time has passed. Press the TIMER button 2 times and the OFF display appears. 1 4 7 2 5 8 0 3 6 9 @ CH CH @ Press the VOLUME UP ( ) or DOWN ( ) button to set the time. (Maximum time that can be preset is 12 hours and 50 minutes. ) In this state, the Timer starts to count down. !, # FUNCTION SYSTEM TIMER NORMAL PICTURE TV # When you have finished setting the time, press the TIMER button 2 times. [. . . ] Press the SYSTEM button 2 times. @ Press the VOLUME UP ( ) or DOWN ( ) button. SOUND SYSTEM mode changes as shown on the right each time you press the VOLUME UP ( ) or DOWN ( ) button. # Press the SYSTEM button again. The on-screen display disappears. · System indication during reception <When set to AUTO> PAL B/G 5 The colour system is automatically detected and selected. The selected system appears. <When set to a specific system mode> PAL B/G 5 The mark indicates that the colour system is set manually. The sound system that was set manually appears. · If approximately 6 seconds pass without a button being pressed, the mode setting is automatically terminated and the TV set returns to normal mode. 16 ENGLISH Function Adjustment Blue Back: Automatically turns the screen blue after 5 seconds if the broadcast signal is not received (e. g. [. . . ]