Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual ALTEC LANSING 604-8L DUPLEX SPEAKER. We hope that this ALTEC LANSING 604-8L DUPLEX SPEAKER user guide will be useful to you.
Lastmanuals help download the user guide ALTEC LANSING 604-8L DUPLEX SPEAKER.
Manual abstract: user guide ALTEC LANSING 604-8L DUPLEX SPEAKER
Detailed instructions for use are in the User's Guide.
[. . . ] Nothing could be further from the truth with Altec Lansing's 604. Whether a vintage model, or our newest model, the 604-8L, the digital medium only improves the performance of the 604. In fact, the 604 makes "digital" sound better. [. . . ] (76 mm) on each side of the cutout, 2 in. (51 mm) on both the top and bottom, and at least 3 in. (76 mm) behind the cabinet wall where the dividing network is to be mounted. Observing polarity, connect the low frequency driver terminals to the "W" wires, and connect the high frequency driver terminals to the "T" wires. (155 mm) section of EVA foam tape, 1 in. (1 mm) thick, along the edge of both sides of the cutout (adhesive side of the tape placed against the inside surface of the cabinet). (184 mm) section of EVA foam tape, 1 in. (1 mm) thick, along the edge of both the top and bottom of the cutout (adhesive side of the tape placed against the inside surface of the cabinet). Centering the HF EQ and MF EQ controls, the input terminal, and the Altec Lansing logo in the cutout window, firmly press the front of the dividing network plate to the inside of the speaker cabinet wall. (13 mm), pan-head wood screws (preferably with a type 17 point), secure the dividing network to the inside of the speaker cabinet wall. FREQUENCY RESPONSE
ARCHITECT'S AND ENGINEER'S SPECIFICATIONS
The loudspeaker shall be a multi-purpose, combination 15 inch (381 mm) low frequency cone driver and one-inch (25 mm) high frequency compression driver. The high frequency compression driver shall be coupled to a MantarayTM constant-directivity horn. The dividing network shall be a dual-section, 12dB/octave slope low pass and 18dB/octave slope high pass with an electro-acoustic crossover frequency of 1, 500 Hz and dual equalization (mid and high frequency) controls. The Duplex® loudspeaker shall have an operating bandwidth of 40 Hz to 20 kHz with a sensitivity of 98. 5 dB when measured at a distance of one meter. The power handling capability shall be 75 watts AES (300 W peak). The nominal impedance shall be 8 Ohms with a minimum impedance of 8. 5 Ohms at 12 kHz. [. . . ] 6 The coverage angles for the loudspeaker are taken as the -6 dB points of the directivity response and averaged from 500 Hz 16 kHz. 7 The minimum impedance of the loudspeaker is taken over its intended band of operation. 8 The distortion measurements of the loudspeaker are performed at a distance of 1 m with RMS input voltages corresponding to 10% of the loudspeaker's rated power handling, calculated using minimum loudspeaker impedance. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ALTEC LANSING 604-8L DUPLEX SPEAKER
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual ALTEC LANSING 604-8L DUPLEX SPEAKER will begin.
