User manual ALTEC LANSING 906-8A HF DRIVER

[. . . ] WARNING • To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CLASS 1 KLASSE 1 LUOKAN 1 KLASS 1 PRODUCTO LASER PRODUCT LASER PRODUKT LASER LAITE LASER APPARAT LÁSER CLASE 1 CAUTION • Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Note to CATV system installer This reminder is provided to call the CATV system installer’s attention to Section 820~40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. [. . . ] You can upgrade in four ways: • • • • By Internet By USB By Disc By Downloaded (File)  Samsung Electronics shall take no legal responsibility for product malfunction caused by an unstable Internet connection or consumer negligence during a software upgrade. ρ If you want to cancel the upgrade while the upgrade software is downloading, press the ENTER button. Download the latest USB software upgrade zip archive to your computer. You should have a single folder with the same name as the zip file. Make sure the disc tray is empty, and then insert the USB flash drive into the USB port of the product. by Internet To upgrade by Internet , follow these steps: 1. Select By Internet, and then press the ENTER button. If there is a download available, the Download pop-up appears with a progress bar and the download starts. When the download is complete, the Upgrade Query window appears with three choices: Upgrade Now, Upgrade Later, or Don’t Upgrade. If you select Upgrade Now, the product upgrades the software, turns off, and then turns on automatically. If you do not make a selection in one minute or select Upgrade Later, the product stores the new upgrade software. œ NOTE  When the system upgrade is done, check the software details in the software Upgrade menu. ρ Do not turn off the product during the Software Upgrade. By Downloaded The By Downloaded option lets you upgrade using a file the product downloaded earlier but you decided not to install immediately or a file downloaded by the product in Standby Mode (See Download in Standby Mode below). to upgrade By Downloaded , follow these steps: 1. If upgrade software has been downloaded, you will see the software version number to the right of By Downloaded. Select By Downloaded, and then press the ENTER button. The product displays a message asking if you want to upgrade. When the update is complete, the product turns off automatically, and then turns on. œ NOTE  To use the Download in Standby Mode function, your product must be connected to the Internet. Contact Samsung Provides contact information for assistance with your product. Press the OPEN/CLOSE ( ) button to open the disc tray. [. . . ] all warranty repairs must be performed by a SECA Authorized Service Center. (The name and address of the location nearest you can be obtained by calling toll free: 1- 800- ALTEC LANSING) LABOR One year (Carry- in) PARTS One year On carry-in models, transportation to and from the service center is the customer’s responsibility. The original dated sales receipt must be retained by the customer and is the only acceptable proof of purchase. It must be presented to the authorized service center at the time service is requested. [. . . ]