User manual ALTEC LANSING 920-8B CEILING SPEAKER

[. . . ] WARNING • To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. CLASS 1 KLASSE 1 LUOKAN 1 KLASS 1 PRODUCTO LASER PRODUCT LASER PRODUKT LASER LAITE LASER APPARAT LÁSER CLASE 1 CAUTION • Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Note to CATV system installer This reminder is provided to call the CATV system installer’s attention to Section 820~40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. [. . . ] œ NOTE  The Power button and the Function button are not possible to change the Brightness. Network Remote Control The Network Remote Control function lets you control your Blu-ray Home Theater from a remote device such as a smart phone through a wireless connection to your local area network. To use the Network Remote Control function, follow these steps: 1. Install the Samsung network remote control application to control your product on your compatible portable device. Make sure your portable device and your product are connected to the same wireless router. Start the application on your portable device. The application should find your product and display it on a list. DVD Parental Rating Prevent playback of DVD discs with specific numerical ratings unless a password is entered. If this is the first time you are using the function, it will ask you to allow or deny remote control of the product. Follow the instructions that came with the application to control the product. œ NOTE Setup  Your product must be connected to the Internet to use the By Internet function. You should have a single folder with the same name as the zip file. Finalize the disc before you remove it from your computer. œ NOTE  When the system upgrade is done, check the software details in the software Upgrade menu. ρ Do not turn off the product during the software Upgrade. It may cause the product to malfunction. ρ To use the By Downloaded function, your product must be connected to the Internet. Download in Standby Mode You can set the Download in Standby Mode function so that the product downloads new upgrade software when it is in Standby mode. In Standby mode, the product is off, but its Internet connection is active. This allows the product to download upgrade software automatically, when you are not using it. to set Download in Standby Mode , follow these steps: 1. Press the ▲▼ buttons to select Download in Standby Mode, and then press the ENTER button. [. . . ] all warranty repairs must be performed by a SECA Authorized Service Center. (The name and address of the location nearest you can be obtained by calling toll free: 1- 800- ALTEC LANSING) LABOR One year (Carry- in) PARTS One year On carry-in models, transportation to and from the service center is the customer’s responsibility. The original dated sales receipt must be retained by the customer and is the only acceptable proof of purchase. It must be presented to the authorized service center at the time service is requested. [. . . ]