User manual ALTEC LANSING 9442A POWER AMPLIFIER

[. . . ] SpeedSpray™ Samsung’s new SpeedSpray technology saves you time by shortening wash times while still keeping all portions of the washing process and getting your clothes clean. SpeedSpray performs in Normal, Bedding PLUS, Deep Steam, Stain Away and Eco Cold cycle and the saving time may vary by cycles and various load and option compositions. Smart Care Samsung’s Smart Care, an automatic error-monitoring system, detects and diagnoses problems at an early stage and provides quick and easy solutions. Pure Cycle™ (Tub Cleaning cycle) Clean your drum with one button! [. . . ] Rinse + Spin - Use for loads that need rinsing only or to add rinse-added fabric softener to a load. The large Digital Display is easy to use. It provides instructions and diagnostics while keeping you updated on the cycle status and time remaining. Press these buttons to select different cycle options. Pure CycleTM - Use to clean dirt and bacteria from the drum. Regular use (after every 40 washes) is recommended. no detergent or bleach is needed (see page 31). Steam - Press this button to use the Steam Wash function. steam Wash is available with the Normal , Heavy Duty , Bedding PLUS , Sanitize , Stain Away and Deep Steam cycles. For heavily soiled, colorfast garments, Steam Wash improves stain treatment and uses less water (See page 25). The steam may not be visible during the Steam cycle, and may also not always be visible while the total steam cycle is being performed. Press the button to select the signal level. (Off Softer Louder) Press to pause and restart programs. Press once to turn your washer on, press again to turn your washer off. If the washer is left on for more than 10 minutes without any buttons being touched, the power automatically turns off. 7 8 Signal selection button Start/Pause selection button Power button 9 Child Lock Child Lock prevents children from playing with your washer. Once you have activated the Child Lock function, the control panel cannot be activated, preventing children from playing with the washer. Activating the Child Lock function Press and hold both the Soil Level and Signal buttons simultaneously for approximately 3 seconds. €¢ When you activate the Child Lock function, the door locks and the “Child Lock ” lamp illuminates. €¢ If you press the Start/Pause button after you have activated the Child Lock function , none of the buttons will work except for the Power button. €¢ If you press a button when the buttons are locked, the “Child Lock ” lamp blinks. Pausing the Child Lock function When the door is locked or the buttons are locked by the Child Lock function, you can pause the Child Lock operation for 1 minute by pressing and holding both the Soil Level and Signal buttons simultaneously for approximately 3 seconds. [. . . ] ALTEC LANSING will provide in-home service during the warranty period at no charge, subject to availability within the contiguous United States. in-home service is not available in all areas. To receive in-home service, product must be unobstructed and accessible to the service agent. If service is not available, ALTEC LANSING may elect to provide transportation of the product to and from an authorized service center. [. . . ]